Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
HardStop inside corner black is an anodized aluminum trim profile designed to finish the inside corner where two HardStop Decorative Protection Panels meet. This trim connects the fiberglass-core laminate wall panels at an inside corner, creating a defined joint that supports a clean transition in commercial wall applications. As one of the HardStop Seam Treatments, this inside corner profile works within the same system as the panels, so the corner detail matches the intent of the High Performance wall surface. Because the HardStop Panels coordinate with the full Formica color range and Formica Brand HPL, this black inside corner trim supports visually consistent corners wherever the same colors are used. The inside corner design focuses the joint exactly at the corner line, which helps keep the panel edges aligned and protected in that change-of-plane area.
This HardStop inside corner black profile is one of five anodized aluminum trim options used with HardStop Panels, so it fits into a complete layout strategy for panel seams and edges. By specifying the inside corner trim at every internal corner, installers define a repeatable joint location that guides panel layout across each wall run. The trim creates a dedicated channel for the two panel edges, which supports straight, plumb inside corners on laminate wall panel jobs. Because HardStop Panels are non-postformable and non-bendable, this trim handles the change in direction that the panel itself cannot form, allowing flat panels to meet at ninety-degree interior corners without forcing the fiberglass core.
This HardStop inside corner black trim is used wherever HardStop Decorative Protection Panels form an interior corner in a wall panel layout. Since the panels are laminate wall panels built on a treated fiberglass core with a Class A fire rating, the inside corner profile is suited to commercial environments that benefit from that performance level along the full corner height. The trim is anodized aluminum, so it works alongside the panels impact-resistant role in areas like corridors or similar high-traffic wall sections that rely on aluminum profiles to protect and define panel edges. Because HardStop Panels coordinate with the full Formica color range and Formica Brand HPL, this black inside corner trim is selected to maintain a controlled visual line through darker or accent color corners, keeping the transition consistent with the surface design. In multi-wall runs, repeating this inside corner profile wherever planes change helps the installer build a clear grid of seams that supports modular panel planning.
The HardStop inside corner black trim is specifically cited under HardStop Seam Treatments, so it is part of a defined set of five anodized aluminum trim profiles for these panels. That clear role means the profile is dimensioned and shaped with HardStop Panels in mind, supporting predictable panel spacing at every inside corner. Because the panels are non-postformable and non-bendable, relying on this inside corner profile prevents stress at the fiberglass core that could occur if a corner were attempted without a dedicated trim. Using the same inside corner detail across a project keeps joint conditions uniform, which simplifies field measuring because each corner is treated as the same hard reference point for panel widths. Since HardStop Panels are commercial matches to standard HPL, applying this matched inside corner profile helps designers and installers extend HPL-like aesthetics through corners while still working within the HardStop wall panel system. The result is an inside corner condition that aligns visually, fits the laminate wall panel construction, and supports consistent installations from room to room.
The HardStop inside corner black trim is used as a seam treatment where two HardStop Decorative Protection Panels meet at an interior corner, creating a defined, protected joint for the laminate wall panels.
The HardStop inside corner black profile is one of five anodized aluminum trim profiles defined as HardStop Seam Treatments, so it is part of the dedicated trim system for HardStop Panels.
HardStop Panels are non-postformable and non-bendable, so the inside corner trim provides the change-of-plane detail, allowing flat fiberglass-core panels to meet cleanly at interior corners.
The HardStop inside corner black trim supports HardStop Panels that coordinate with the full Formica color range and Formica Brand HPL, letting installers pair the corner detail with darker or accent color schemes.
The HardStop inside corner black trim is used with HardStop Panels, which have a treated fiberglass core and Class A fire rating, so it fits commercial laminate wall panel applications using that system.
The HardStop inside corner black trim creates a dedicated channel where two HardStop Panels meet, helping keep the inside corner seam straight and the panel edges aligned throughout the wall height.
The HardStop inside corner black anodized aluminum trim is built to work specifically with HardStop Decorative Protection Panels, giving installers a defined inside corner joint that matches the laminate wall panel system. By using this HardStop Seam Treatment at interior corners, wall layouts benefit from repeatable joints that respect the non-bendable, fiberglass-core construction and support the Class A fire-rated panel assembly. For projects using the full Formica color range or matching Formica Brand HPL, this black inside corner profile helps carry the design and panel alignment cleanly through every change of plane.
Sold In: 1 Each