Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Rev-A-Shelf 53PSP Series blind corner optimizer puts four shelves on a full-extension, soft-close system so the contents of a blind corner base cabinet slide fully into view instead of staying buried in the back.
A blind corner cabinet is one of the most frustrating spaces in a kitchen layout. The opening is narrow, the usable area is deep, and anything pushed past the front shelf disappears. This pull-out addresses that directly: the two-tier frame rides on full-extension slides, so pulling on the front shelf brings the entire four-shelf stack out into the open. Pots, canned goods, small appliances, and pantry items that would otherwise require digging are visible and reachable in one motion. The soft-close slides handle the return, so a loaded unit goes back into the cabinet under control.
The frame and shelves are steel with a gray powder-coat finish. Gray is a practical choice for a blind corner application: it reads as neutral against most cabinet interiors, shows less scuffing than a bright metallic, and coordinates with a range of liner and bin colors. The steel construction supports a 27-pound load rating distributed across four shelves, which is enough for a realistic mix of canned goods, cookware, and pantry staples. The unit is non-handed, so orientation is set during installation rather than at the point of ordering.
This unit is sized for a standard blind corner base cabinet: it requires a minimum cabinet opening of 15 inches wide, a minimum opening depth of 22-5/8 inches, and a minimum opening height of 21-1/4 inches. It is the right fit for a kitchen renovation where the blind corner has been dead storage, and for a cabinet shop or installer specifying organizers across a full kitchen run. The non-handed configuration means the same SKU covers both left and right blind corners on the same order, which simplifies procurement. It does not include a door-mount bracket, so the pull-out operates independently of the cabinet door.
The gray powder-coat is a mid-tone neutral that sits comfortably alongside stainless appliances and works in white, gray, or natural wood cabinet interiors. It is not a bright chrome or a warm wood tone, so it tends to recede rather than stand out against most backgrounds.
It is non-handed. One unit installs in either a left- or right-opening blind corner, so you do not need to order separate SKUs for opposite corners in the same kitchen.
No. This unit does not include a door-mount bracket and operates independently of the cabinet door. The pull-out extends on its own slides when you open the cabinet and pull the shelf forward.
The unit needs at least 15 inches of clear opening width, 22-5/8 inches of opening depth, and 21-1/4 inches of opening height. Measure the clear interior opening, not the door or face frame, before ordering.
Choose this gray steel pull-out to convert a blind corner base cabinet from dead storage into four fully accessible shelves, with soft-close slides and a non-handed design that simplifies both specification and installation.
Sold In: 1 Each