Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Salice 135 Degree Mounting Plate gives a defined base for a 135 degree hinge, so the hinge seats properly and swings at the intended angle. This matters when aligning corner or wide-opening doors where the hinge geometry depends on a stable plate. As a hinge mounting plate in the Salice America line, it establishes the fixed reference point between cabinet and hinge arm, which supports repeatable drilling patterns and consistent reveals across multiple doors. Classified under hinge mounting plates, it serves as the structural interface rather than a decorative part, which keeps alignment focused on function. The plate works as the foundation in a hinge system, so once it is positioned, hinge adjustments relate back to a solid datum, helping maintain uniform gaps and smooth operation over runs of cabinets.
The Salice 135 Degree Mounting Plate with Euro Screw acts as the interface between a 135 degree hinge and the cabinet, so installation starts by positioning this plate to match the intended door overlay and swing. Because it is described as a die cast angled base plate, the installer relies on the built-in angle rather than shimming, which simplifies layout on angled or corner locations. As a hinge base plate within the Salice America range, it provides a known geometry for hinge arms designed for this configuration, supporting straightforward alignment when duplicating an existing cabinet run. The Euro screw reference signals a Euro-style mounting method that fits system drilling patterns, which helps streamline installation in cabinets built around 32 mm or similar modular layouts.
The die cast angled base plate description indicates that this Salice America plate is shaped for angled hinge applications, so it fits situations where a 135 degree hinge is specified, such as corner or wide-opening doors. Working as a hinge mounting plate in the hinge base plates product class, it sits between cabinet and hinge arm, turning a flat cabinet surface into the correct hinge mounting angle. In cabinet shops using standardized components, the Salice 135 Degree Mounting Plate allows hinges designed for 135 degree openings to be used consistently wherever that angle is required. Because the piece is part of the hinges and hinge base plates category, it slots naturally into cabinet hardware planning, giving designers and installers a clear part to call out when specifying 135 degree motion.
The mounting plate design focuses on function, so it defines the hinge location and angle rather than changing cabinet appearance, which matters when building matching banks of doors. With the plate acting as the fixed base under the hinge, door motion depends on this single component, so choosing the Salice 135 Degree Mounting Plate where a 135 degree hinge is planned keeps the assembly geometry aligned with the hardware design. The Euro screw reference ties its use to Euro-style cabinet construction, where pre-drilled system holes receive matching hardware; when the plate fits that pattern, it helps installers move quickly down a run of cabinets, placing each plate in a repeatable position and maintaining uniform alignment.
As a hinge mounting plate built specifically for 135 degree operation, this Salice America component locks in the relationship between cabinet and hinge arm, which stabilizes door positioning over time. The die cast angled base plate construction means the angle is formed into the body of the plate, so every unit maintains the same geometry and supports consistent hinge performance across multiple cabinets or an entire project. Using a defined plate instead of improvised mounting blocks cuts down on layout guesswork, because the hinge manufacturer has already matched the plate angle to the hinge design. In day-to-day work, that translates into faster hinge setting and fewer adjustments, since the hinge arm references a predictable base.
The Salice 135 Degree Mounting Plate with Euro Screw, identified by BARGRW9M, ties directly to a specific configuration within the Salice America system, which helps keep replacement or expansion work aligned with original hardware choices. When the same part number is repeated on service calls or add-on cabinets, the installer can expect the same hinge-to-door relationship as the original job. Being classed under hinge base plates also clarifies its purpose to everyone on the team: it is the structural mounting point for a hinge, not a decorative trim piece. That clarity supports better planning in the shop, more accurate hardware counts on project lists, and smoother cabinet door motion once the hinges are hung.
The Salice 135 Degree Mounting Plate is described for 135 degree applications, so it is intended to work with hinge arms designed for a 135 degree opening angle on cabinet doors.
The die cast angled base plate provides a fixed, built-in angle, so each plate positions the hinge the same way, supporting consistent door gaps and motion across multiple cabinets.
As a hinge mounting plate in the hinge base plates product class, it forms the structural connection between cabinet and hinge arm, defining where the door pivots from the cabinet.
A 135 degree hinge base plate is used where a 135 degree hinge is specified, such as angled or corner cabinet doors that need a wider opening than standard hinges provide.
The Euro screw detail in the description indicates a Euro-style mounting interface, suitable for system-based cabinet construction using matching Euro-style screw locations.
The BARGRW9M part number uniquely identifies this Salice America die cast angled base plate, helping installers match original hardware and specify exact replacements on future work.
The Salice 135 Degree Mounting Plate with Euro Screw provides the angled hinge base needed for 135 degree openings, so cabinet doors follow the intended swing path. As a die cast angled base plate from Salice America, it offers defined geometry instead of improvised mounting blocks, which supports consistent results across cabinet runs. Identified as a hinge mounting plate in the hinge base plates category and by part number BARGRW9M, it fits directly into hardware plans where a 135 degree hinge layout is specified. For projects calling for 135 degree hinge motion on Euro-style cabinetry, this mounting plate aligns the hinge with the cabinet design.
Sold In: 1 Each