Material handling cart from Paintline is built to move multiple parts through a shop or production area while keeping panels supported and organized. The lateral panel cart design lets parts sit upright, so finished or unfinished pieces travel between workstations without stacking. A powder-coated steel base with MDF decking creates a rigid platform that handles daily shop use while giving parts a flat surface under load. Heavy duty 6 inch casters provide maneuverability when the cart is loaded, so workers can steer around equipment and benches. The cart is designed to become a lumber cart when all dividers are removed, so one unit can handle both sheet goods and longer stock. A 22 inch width lets the cart move through congested aisles where floor space is tight and turning room is limited.
The lateral panel cart layout supports panels on edge, so workers can access individual parts without lifting a full stack. Dividers that run along the width or length of the cart create up to 12 bins, giving each job or part size its own slot as it moves through production. When longer stock or sheet goods are needed, removing dividers turns the cart into a lumber cart that still benefits from the same steel base and MDF deck. Heavy duty 6 inch casters keep the footprint rolling smoothly, which helps in tight turns and when moving near finished cabinets or equipment. With a 22 inch width, the cart tracks through congested aisles that would be difficult for wider racks, helping maintain flow in compact shops.
This Paintline material handling cart fits into shops that move multiple parts between cutting, finishing, and assembly. The lateral panel cart format supports panels upright, so operators can roll parts from one process to the next without re-stacking on benches. Dividers that install along the width or length of the cart let teams dedicate up to 12 bins to different jobs, sizes, or stages. In material areas, removing all dividers turns the frame into a lumber cart, so the same cart can stage sheet goods or long pieces for upcoming work. The 22 inch width lets the cart move along congested aisles between machines, spray areas, and storage, staying inside narrow travel lanes. Heavy duty 6 inch casters support this movement while the powder-coated steel base with MDF decking keeps the load supported.
The powder-coated steel base with MDF decking provides a consistent, rigid deck, so loads up to the 2,000 lb weight capacity stay supported from day to day. This construction reduces deck deflection under heavy parts, which helps keep panels aligned in the dividers. Dividers that can be set along the width or length of the cart allow the same frame to be reconfigured as work changes, supporting repeat setups for common panel sizes or job types. Being able to create as many as 12 bins lets teams assign a lane to each order, reinforcing the same handling pattern every time pieces move. Heavy duty 6 inch casters are sized for loaded movement, so the cart maintains similar rolling behavior across different weights. The narrow, 22 inch width repeats the same aisle fit on every pass, which helps keep routing predictable in shops with tight clearances.
The PAPROCART-4 is a Paintline material handling cart with a lateral panel cart design, so it is built to move multiple parts or panels through a shop or production area.
The material handling cart has a 2,000 lb weight capacity, allowing crews to transport heavy or multiple parts on a single cart during shop operations.
The cart uses removable dividers that install along the width or length, creating up to 12 bins so users can separate parts by job, size, or process during handling.
The PAPROCART-4 becomes a lumber cart when all dividers are removed, so the same frame can move longer stock or sheet goods through the shop.
The cart has a powder-coated steel base with MDF decking, providing a rigid platform that supports panels and parts during transport in the shop.
The cart has a 22 inch width that works well in congested aisles, so it can travel between machines and racks without occupying excessive floor space.
The Paintline PAPROCART-4 material handling cart combines a powder-coated steel base, MDF decking, and heavy duty 6 inch casters to support up to 2,000 lbs in daily shop use. Removable dividers that install along the width or length create up to 12 bins or open space for lumber, so one cart can follow parts from cutting through production. With its 22 inch width, the lateral panel cart design moves smoothly in congested aisles while keeping panels upright. Select this cart when a single, reconfigurable platform is needed to move panels and lumber through tight shop layouts.
Sold In: 1 Package