Amana RC-1030 insert is a 48x12x1.5mm tool insert identified by Amana Tool as part number RCK-133, so it serves as a defined replacement component for compatible Amana cutting heads in your shop workflow. The insert geometry is specified as 90 degrees, which means it is shaped to present a square cutting edge that supports accurate corner profiles when used in the proper cutter body. The compact 48x12mm footprint allows this insert to fit into cutter heads designed around that size standard, keeping the cutting diameter and profile consistent with the original tool design. The 1.5mm thickness dimension helps maintain the correct projection from the cutter body, which is important for repeatable cutting depth and consistent material removal across multiple inserts installed on the same head.
This tool insert is specified at 48x12x1.5mm, so cutter bodies built around that insert pocket size can hold the insert securely while presenting the correct cutting geometry during operation. The 48mm dimension works along the cutting edge direction, allowing the cutter body to support the insert across its full length to resist movement under load. The 12mm dimension runs across the width of the insert, so the pocket in the head can locate it laterally and keep the edge aligned with the intended cutting circle. The defined 1.5mm thickness allows a cutter head designed for this value to clamp evenly on the insert, helping maintain correct projection and supporting balanced rotation when multiple inserts are installed.
This Amana 48x12x1.5mm insert is specified as RC-1030, so it is intended for use in tooling arrangements that reference that RC-1030 designation in their design. In practical terms, that means cutter heads or tool bodies configured for the RC-1030 style can use this insert to restore the intended cutting edge when it is time to swap worn edges. The 90 degree insert geometry allows these tools to present a square cutting edge to the material, which is useful in operations where crisp shoulders or right-angle profile elements are part of the machining process. Because the insert dimensions are fixed at 48x12x1.5mm, tool bodies that were originally engineered around this insert size will continue to produce the same cutting envelope when this RCK-133 insert is installed, supporting consistent results across batches.
The RCK-133 designation from Amana Tool ties the insert to a specific engineering standard, so using this exact insert helps keep tool performance aligned with the original RC-1030 design parameters. The consistent 1.5mm thickness means that each time an insert is replaced, the edge position relative to the cutter body remains stable, which matters when matching previous settings and maintaining uniform cutting depths across multiple heads. The 48mm length and 12mm width work together to seat firmly in a matching pocket, which helps resist shifting during heavy cutting and contributes to smoother finishes when the rest of the setup is correctly configured. By relying on the verified RC-1030 90 degree geometry, the insert supports predictable right-angle edge formation, so production runs that depend on square profiles can continue without reworking cutter design or recalculating tool paths.
The Amana 48x12x1.5mm insert uses these dimensions to define its length, width, and thickness, which lets matching cutter heads locate and clamp the insert for consistent edge position.
The RC-1030 90 degree insert geometry presents a square cutting corner, which supports machining tasks that rely on right-angle edges and crisp shoulders in the finished work.
The RCK-133 manufacturer part number identifies this specific Amana Tool insert, which simplifies matching it to RC-1030 style cutter bodies that reference the same insert design.
The 1.5mm insert thickness defines how far the edge projects from the cutter body, helping maintain consistent cutting depth when the head is designed for this dimension.
The 48mm length and 12mm width allow cutter pockets built to these sizes to support the insert along its edge, helping stability and balanced cutting in matched tooling.
This tool insert is classified as a replacement part in the Bits and Blades Accessories and Replacement Parts class, so it restores the cutting edge on compatible Amana tooling.
The Amana Tool insert identified as RC-1030 and RCK-133 provides a defined 48x12x1.5mm, 90 degree cutting element for tooling systems built around that specification. For shops standardizing on Amana Tool designs, using this insert within RC-1030 based cutter heads maintains the intended cutting geometry without changing the body. The clear dimensions and part numbering help align inventory, so when an edge needs replacement, this same insert restores the tool to its original cutting profile and supports consistent machining performance.
Sold In: 1 Each