Amana N/D SCPOINT/ROUNDOVER 1/16Rx1/4SHK, 56142

Amana 56142 Router Bit For Clean Profiling

Amana 56142 router bit identifies this Amana Tool profiling router bit so installers and shop crews can match it to drawings or repeat a proven setup on future jobs. The SCPOINT/ROUNDOVER 1/16Rx1/4SHK designation defines a combined point and roundover profile with a 1/16 inch radius and 1/4 inch shank, giving a compact bit that produces a small eased edge detail without changing collets. The Amana Tool brand ties this bit directly to a professional tooling line used in woodworking, helping teams standardize on a known router bit class for profiling work. The router bits category and profiling product class place this tool in edge-shaping and detail work, letting it serve on cabinet components, trim pieces, or furniture parts whenever a subtle roundover and point profile is needed.

Profiling Details That Support Repeatable Results

• The SCPOINT/ROUNDOVER profile designation gives a defined shape for combining a point and roundover, so shops can call out this exact look on drawings and keep the finished edge consistent across multiple parts or future production runs.
• The 1/16R spec sets the radius at 1/16 inch, which produces a small eased edge that breaks sharp corners while keeping profiles tight, helping parts fit together cleanly without dramatically changing dimensions.
• The 1/4SHK designation identifies a 1/4 inch shank, so the bit fits routers or collets sized for that standard, simplifying setup on lighter-duty routers commonly used on-site or in smaller bench operations.
• The router bits category and profiling product class confirm this tool is intended for shaping and edge work, allowing teams to slot it into their tooling plans wherever controlled decorative or softening passes are required.
• The Amana Tool brand connection provides a clear manufacturer reference, which helps shops match existing bits in their racks and order the same profile again when they need to replace or duplicate a cutting setup.

Router Bit Fit, Shank Size, And Setup Use

The 1/4SHK notation defines a 1/4 inch shank on this Amana N/D SCPOINT/ROUNDOVER 1/16Rx1/4SHK, 56142 router bit, giving a clear match to routers equipped for 1/4 inch tooling and supporting straightforward collet selection. The SCPOINT/ROUNDOVER 1/16R description specifies the edge geometry, so operators can dial in fence position and depth of cut knowing the radius and shape they are producing with each pass. The router bits product class and profiling category tell crews this tool is meant for shaping, guiding them to use standard router workflows for edging and detail rather than drilling-style operations.

Using This Profiling Router Bit In Woodwork

Where This Amana 56142 Router Bit Fits

The Web Description and SAP Description both identify this tool as Amana N/D SCPOINT/ROUNDOVER 1/16Rx1/4SHK, 56142, placing it clearly as a profiling router bit within the Bits, Blades and Cutters category. That classification means it serves in setups where edges and profiles need definition, such as cabinet parts, trim components, or similar routed pieces that call for a controlled shape rather than simple straight cutting. The 1/16R value defines a small radius, lending itself to subtle easing of corners where designers want edges broken without visually heavy roundovers. Because the product class is Router Bits and the brand is Amana Tool, shops can align this bit with other router tooling in their racks, assigning it to workstations or portable routers already set up to run profiling passes on finished or near-finished workpieces.

Why The 1/16R And 1/4 Shank Details Matter

The SCPOINT/ROUNDOVER 1/16R profile uses a defined 1/16 inch radius, so each pass produces a predictable eased edge that holds dimensions closely, helping parts seat properly in joinery or next to adjacent components. The 1/4SHK shank spec tells installers and fabricators that this router bit is sized for 1/4 inch collets, letting them assign it to routers designed around lighter 1/4 inch tooling without adapter steps. Having the Manufacturer Part # 56142 and matching Web Description and SAP Description gives purchasing and shop managers a single consistent identifier, reducing mis-picks when reordering or pulling bits for a specific job. The profiling category ensures operators treat this bit as an edge-forming tool in routing workflows, planning feeds, passes, and jigs around shaping rather than hole cutting.

Common Questions About The Amana 56142 Router Bit

Select The Amana 56142 Bit For Defined Profiles

The Amana N/D SCPOINT/ROUNDOVER 1/16Rx1/4SHK, 56142 pairs a 1/16 inch radius profile with a 1/4 inch shank, giving woodworking teams a compact profiling router bit for subtle eased edges. The clear Manufacturer Part # 56142 and SCPOINT/ROUNDOVER designation allow straightforward matching between drawings, purchasing records, and the bit on the rack. For shops and installers planning consistent edge details using router-based profiling, this Amana Tool router bit from Wurth Baer Supply provides a defined profile and shank size that support repeatable routing workflows.