Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
SP80 low VOC bulk contact adhesive is a clear contact adhesive supplied in a 52 gallon drum for high-volume use where consistent bonding performance and drum-size supply support continuous production work without frequent changeovers or interruptions.
This SP80 contact adhesive is identified as a low VOC formulation, which supports projects where regulated emissions are important and helps shops align their adhesive choice with low VOC requirements while still using a familiar contact adhesive process.
The product is classified as a contact adhesive and described as spray adhesive, so it is suited to applications where a sprayed contact bond is preferred and where uniform, even coverage over panels, laminates, or similar substrates improves bond consistency across large surfaces.
The clear color of this SP80 contact adhesive means the bond line does not add visible color of its own, which matters in work where a neutral bond area is preferred so that the adhesive does not visually compete with finished surfaces or edge details.
The 52 gallon drum format for SP80 low VOC bulk contact adhesive gives shops a single large-volume source of adhesive, which supports longer production runs and reduces time spent handling smaller containers during regular workflow.
The SP80 low VOC bulk contact adhesive in a 52 gallon drum is structured for bulk delivery, so it fits setups where drum-fed spray systems are used and where adhesive is drawn from the drum to the spray equipment as part of a continuous workflow.
Because SP80 is described as a contact adhesive and spray adhesive, it is used in processes where adhesive is applied to surfaces and then brought together after solvent flashing, so operators can integrate SP80 into existing contact bonding steps that rely on sprayed films.
The clear formulation of this SP80 contact adhesive supports applications where the adhesive is present near finished edges, because a clear bond line allows the focus to remain on the laminated or bonded material rather than on the adhesive itself during installation or trimming.
The low VOC nature of the SP80 bulk contact adhesive matters in organized shop environments that must coordinate adhesive choices with low VOC expectations, since selecting this product ties drum-based adhesive supply to a low VOC contact adhesive formulation.
The SP80 low VOC bulk contact adhesive is a contact adhesive from the Sta-Put brand in a 52 gallon drum, so it suits operations that prefer contact bonding and rely on drum-size adhesive volumes to support extended production shifts without changing to new adhesive containers.
Because SP80 is identified as spray adhesive, it integrates with spray application equipment typically used in shops, allowing teams to distribute adhesive in an even film across panels, substrates, and laminates so the contact bond develops consistently across the workpiece.
The clear nature of this SP80 contact adhesive supports work where the adhesive layer may be near visible areas, so the final appearance reflects the surface material rather than adhesive color, which is useful when bonding decorative laminates or finished sheet goods.
The low VOC property of the SP80 bulk contact adhesive aligns the adhesive choice with low VOC expectations, which is important in environments where adhesive selection must reflect low VOC requirements while still operating as a contact adhesive in a drum-fed system.
The 52 gallon drum format for SP80 low VOC bulk contact adhesive provides a large, continuous supply of contact adhesive, which helps maintain uniform performance across many parts by drawing from the same drum through extended runs.
This Sta-Put SP80 contact adhesive, identified with manufacturer part number SP80-55C and described as OTC flam spray adhesive clear, is clearly defined for spray contact use, so installers can match their spray process to a product specifically described as spray adhesive.
The clear coloration of the SP80 spray contact adhesive contributes to a clean-looking bond area, which is useful when trimming edges or when bonded seams may be viewed up close, because the adhesive itself does not introduce added color at the joint.
The low VOC description of SP80 bulk contact adhesive ties its formulation to reduced VOC characteristics, which supports specifying this drum adhesive in documented projects where low VOC contact adhesive is required as part of material selection and project records.
SP80 low VOC bulk contact adhesive is a contact adhesive described as spray adhesive, so it is used for contact bonding applications where a sprayed adhesive film is preferred across surfaces.
SP80 low VOC bulk contact adhesive is described as low VOC, which helps align adhesive choice with reduced VOC expectations on projects that call for low VOC contact adhesive formulations.
The SP80 low VOC bulk contact adhesive is supplied in a 52 gallon drum, providing substantial volume from one container, which supports long production runs using drum-fed spray systems.
SP80 low VOC bulk contact adhesive is clear, so the bond area stays visually neutral, which matters when adhesive lies close to visible seams or edges on finished parts.
SP80 low VOC bulk contact adhesive is identified as spray adhesive, so it is applied through spray equipment to create an even adhesive film for contact bonding of suitable surfaces.
The manufacturer part number SP80-55C identifies this Sta-Put SP80 low VOC bulk contact adhesive as the clear, spray contact adhesive supplied in drum format for bulk use.
Choosing SP80 low VOC bulk contact adhesive in the 52 gallon drum format ties your shop to a clear, low VOC contact adhesive that is described for spray use, so high-volume work can rely on a single Sta-Put drum to support ongoing contact bonding.
Sold In: 1 Each
