Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
bottom mount waste pullout from Rev-A-Shelf gives an 18 inch base cabinet a cleaner way to manage everyday trash with a floor-mounted pullout frame and two black bins. This Rev-A-Shelf waste pullout is a bottom mount trash pullout designed for cabinet installation, with built-in door-mount brackets for a cabinet door mount trash pullout setup. It includes soft close slides, full extension travel, and 1-1/2 inch over-travel to bring the bins farther out for access. Buyers looking for a soft close trash pullout or an 18 inch base cabinet waste pullout can use this model when the cabinet opening and door mounting conditions match the product requirements. The carriage is black anodized aluminum, and the set includes two 35 quart waste bins.
Key specs to confirm: This black bottom mount waste pullout is designed for an 18 inch base cabinet and uses a 10 inch anodized aluminum carriage. The web description lists a width of 14-25/32 inches. Buyers should confirm the cabinet opening, interior depth, interior height, and door mounting position before ordering. Because this is a bottom mount unit with built-in door-mount brackets, check that the cabinet floor is suitable for mounting and that the door alignment will allow smooth pullout travel. The product includes full-extension slides with 1-1/2 inch over-travel and soft close. Load rating, compliance details, and any other installation tolerances are not provided here and should be confirmed with the manufacturer or technical documentation.
What's included: One black carriage, two 35 quart black bins, and soft close slides.
What to verify before ordering: Confirm your base cabinet size, inside clear opening, door attachment needs, available floor space for bottom mounting, and whether your project requires any additional installation guidance for local building requirements where applicable.
A double bin waste pullout fits projects where the goal is to move trash off the floor and into a base cabinet while keeping access simple. In a busy kitchen, two 35 quart waste bins can support basic sorting, such as one bin for trash and one for recyclables, without using a second cabinet. For remodel work, this can help preserve visible floor space and keep the cabinet front looking consistent because the unit mounts to the cabinet door and floor.
This Rev-A-Shelf waste pullout is aimed at buyers who already know they need a bottom mount format rather than a side-mount frame. The bottom mount layout matters when the installer wants the pullout supported from the cabinet floor. The built-in door-mount brackets also matter because they support a cabinet door mount trash pullout arrangement without having to source a separate bracket kit from the start. If your cabinet door style, hinge position, or interior obstructions could affect swing and pullout travel, those details should be checked before purchase.
For day-to-day use, the full extension waste pullout design helps bring the bins out where they are easier to reach. The listed 1-1/2 inch over-travel can also help improve access beyond standard extension. Soft close slides are useful in family kitchens, breakroom cabinets, or other spaces where a controlled closing motion is preferred. Buyers replacing an older kitchen cabinet trash pullout may also want to compare the existing cabinet opening and mounting pattern to this product's verified cabinet application and listed width before ordering.
The black bottom mount waste pullout finish can make sense when the rest of the hardware package uses darker tones or when a neutral interior appearance is preferred. Since this model is sold as a specific Rev-A-Shelf bottom mount trash pullout with included bins, it is better suited to buyers who want a complete pullout set rather than only a frame.
When comparing a soft close trash pullout, buyers usually focus on four things: cabinet fit, mounting method, included bins, and slide travel. This product gives verified answers on each of those points. It is designed for an 18 inch base cabinet, it mounts to the cabinet door and floor, it includes two 35 quart bins, and it uses full-extension soft close slides with 1-1/2 inch over-travel.
That matters because many pullout choices look similar until installation details are reviewed. A generic waste pullout may require separate door-mount hardware, may use a different cabinet application, or may not include bins in the package. A buyer who needs a Rev-A-Shelf waste pullout for a planned cabinet width can use these verified points to screen fit faster. The black anodized aluminum carriage is also a clear product detail that helps identify the exact configuration being ordered.
For installers, clear included components reduce surprises on site. For homeowners and serious DIY buyers, the practical value is knowing this is a bottom mount trash pullout with a double-bin layout and soft close operation, not a single bin frame or an open top freestanding can. If your project depends on exact interior dimensions, hinge clearance, or a specific load requirement, those details are not fully listed here and should be confirmed in the manufacturer documentation before final purchase.
This Rev-A-Shelf bottom mount waste pullout is designed for an 18 inch base cabinet. Confirm your cabinet's clear interior opening and mounting space before ordering.
This Rev-A-Shelf waste pullout includes two 35 quart black bins.
This cabinet door mount trash pullout includes built-in door-mount brackets, and the web description states it mounts to the cabinet door and floor.
This product is a bottom mount trash pullout. It is intended to mount to the cabinet floor.
This soft close trash pullout includes soft close slides for controlled closing.
This full extension waste pullout uses full-extension slides with 1-1/2 inch over-travel.
This black bottom mount waste pullout is listed at 14-25/32 inches wide. Confirm that dimension against your cabinet opening.
This bottom mount waste pullout requires cabinet floor mounting space, door attachment alignment, and clear interior access. Follow manufacturer installation guidance and local building requirements where applicable.
This product listing does not provide load rating or compliance details. Confirm those points with the manufacturer or technical documentation if your project requires them.
Rev-A-Shelf waste pullout buyers should confirm cabinet fit first, then match the mounting method and included parts to the job. This model gives you a bottom mount trash pullout for an 18 inch base cabinet, a black carriage, two 35 quart black bins, built-in door-mount brackets, and soft close full-extension slides with 1-1/2 inch over-travel. Before purchase, verify your cabinet opening, floor mounting surface, and door alignment so the pullout installs and operates as intended.
This black bottom mount waste pullout is a practical pick for buyers who need a verified Rev-A-Shelf double-bin pullout with soft close slides and door-mount capability. It is sold with one black carriage, two 35 quart bins, and the slide hardware described in the listing. Check your 18 inch base cabinet application, interior clearance, and door mounting conditions before ordering so the product matches your cabinet and installation plan.
Sold In: 1 Pallet
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Kit |  RS5345-DM18-KIT1 Mfr# 5345-DM18-KIT-1 | Rev-A-Shelf 5349 Series Black Door Mount Kit, 4-9/16"W x 1-31/32"H x 31/32"D - 5345-DM18-KIT-1 | ||||
Sold in: 1 Package | RS5345-DM18-KIT25 Mfr# 5345-DM18-KIT-25 | Rev-A-Shelf 5349 Series Black Door Mount Kit, 4-9/16"W x 1-31/32"H x 31/32"D - 5345-DM18-KIT-25 |
