Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
DecoMetal laminate 6435 woven brass gives you a Formica Corporation metal laminate with a specific woven brass design, so you can evaluate this exact look and texture on real projects before committing to larger sheet sizes. The product is identified as 8X10 WOVEN BRASS DECOMETAL, which provides a manageable sample size for laying out against doors, panels, and trim in the shop or on-site. Grade 85 at .040 inch (1.0 mm) thickness delivers a representative section of the actual metal laminate construction, helping you judge edge build, transitions, and reveals alongside adjacent materials. This DecoMetal metal laminate uses a phenolic back, giving the sample the same structural backing as full sheets, so installers can test routing, cutting, and bonding behavior under typical shop conditions. Engineered for vertical interior applications, this sample supports decisions for feature walls, columns, and other upright decorative surfaces where appearance and structure must be evaluated together.
This DecoMetal laminate 6435 woven brass is engineered for vertical interior applications, so its properties and backing are tailored to wall panels, fronts, and other upright decorative elements rather than horizontal work surfaces. The 8 x 10 format supports quick mockups on sample boards, allowing you to place the metal laminate next to woods, paints, and other laminates to confirm how it reads in the intended lighting and height. The grade 85 thickness at .040 inch (1.0 mm) keeps the sample structurally comparable to full sheets, so when you tape, clamp, or temporarily bond it onto substrates, you can assess how edges align with adjacent components. With a phenolic back designed for improved adhesion to substrates, the sample also lets you trial clamping pressure and adhesive spread rates on small test pieces while using the same backing structure you will see in production work.
The DecoMetal laminate 6435 woven brass is described as a DecoMetal metal laminate, indicating a metal sheet layer over a phenolic back, which suits visually prominent vertical interior locations such as feature panels and decorative elements. The woven brass designation ties the sheet to a specific brass appearance, so it aligns well with hardware, trims, or other brass-toned components selected elsewhere in the project. Because the laminate is engineered for vertical interior applications, it is aimed at interior environments where walls, fronts, and fascia carry the visual impact rather than heavy wear surfaces. The 8 x 10 sample size makes it practical to move between rooms or zones within a job, so designers and installers can hold it against actual installed millwork and wall colors. This hands-on fit comparison helps refine the decision about where the woven brass effect delivers the best result.
The Formica Corporation grade 85 DecoMetal construction at .040 inch (1.0 mm) gives the laminate a defined thickness, so fabricators can plan grooves, edge caps, and transitions with predictable build. The phenolic back prevents creasing, which maintains a flat surface on the sample, allowing accurate evaluation of reflections, pattern direction, and joint alignment when pieces are placed edge-to-edge. Because the phenolic back allows for improved adhesion to substrates, trial bonds using this sample inform decisions about adhesive type and spread patterns under realistic backer conditions. The description of polished, anodized, matte, brushed or mirror aluminum or copper sheet highlights that DecoMetal uses true metal sheet faces, so routing and trimming behavior observed on the sample reflects how the full-size sheets will machine. With the 6435 woven brass identification, any layout tests on this sample directly relate to ordering the correct visual variant for full project quantities, supporting consistent results across all installed panels.
DecoMetal laminate 6435 woven brass is a Formica Corporation DecoMetal metal laminate using a metal sheet with a phenolic back, intended for decorative vertical interior applications.
The DecoMetal 6435 woven brass sample is identified as 8X10 WOVEN BRASS DECOMETAL, giving a compact 8 x 10 format for testing appearance and layout.
The DecoMetal grade 85 with .040 inch (1.0 mm) thickness indicates the laminate build, helping fabricators plan edges, reveals, and transitions with realistic thickness expectations.
The DecoMetal phenolic back prevents creasing and allows for improved adhesion to substrates, supporting flat panels and consistent bonds in vertical interior installations.
DecoMetal laminate 6435 woven brass is engineered for vertical interior applications, aligning it with wall panels, fronts, and similar decorative upright surfaces.
The woven brass 6435 designation identifies a specific woven brass visual effect within the DecoMetal line, guiding selection when coordinating with other Formica materials and finishes.
The DecoMetal laminate 6435 woven brass 8 x 10 format from Formica Corporation provides a practical way to evaluate this grade 85, .040 inch (1.0 mm) metal laminate before ordering full sheets. With a phenolic back designed to prevent creasing and allow improved adhesion to substrates, the sample supports realistic testing of appearance and bond on your preferred materials. Engineered specifically for vertical interior applications, it helps align laminate selection with doors, panels, and other upright decorative elements. Selecting this woven brass 6435 sample through Wurth Baer Supply puts a clearly defined DecoMetal option in hand for accurate specification and planning.
Sold In: 1 Each