Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
DecoMetal Laminate 3721 Platinum Linework sets up a clear visual reference for Formica Corporation metal laminate work, so installers and designers can review pattern and sheen before committing to full-size material. This piece is described as Grade 85 at 0.040 inch, or 1.0 mm thick, which reflects the thickness of the DecoMetal laminate construction and helps you visualize the edge profile where it will transition to adjacent surfaces. The laminate is an aluminum or copper sheet with a phenolic back, which pairs decorative metal on the face with a stable backing layer for bonding to a substrate. That structure keeps the decorative metal supported in service, which matters for consistent appearance on vertical interior applications such as feature panels or casework faces.
Formica DecoMetal laminate in the 3721 Platinum Linework design is supplied as a metal sheet with a phenolic back, which means the working face is metal while the rear side presents a consistent phenolic surface for bonding. That structure lends itself to typical laminate fabrication sequences, where the phenolic side mates to the chosen substrate and the decorative metal face remains exposed. The stated 0.040 inch, or 1.0 mm, thickness defines how proud or flush this laminate will sit relative to adjacent materials, which matters when aligning edges or building reveals on vertical interior elements. Because the product is engineered specifically for vertical interior applications, layout and cutting are oriented toward walls, casework fronts, and similar upright surfaces rather than horizontal worktops.
Formica Corporation DecoMetal laminate in the Platinum Linework 3721 design is engineered for vertical interior applications, which points it toward areas such as wall cladding, cabinet ends, or decorative panels that remain upright in use. The construction combines polished, anodized, matte, brushed, or mirror aluminum or copper on the face with a phenolic back, which delivers the decorative metal look on the visible side while presenting a phenolic surface to the substrate. That combination keeps the visually critical metal face to the room while the backing handles the structural role against the core material. The Grade 85, 0.040 inch (1.0 mm) thickness describes how substantial the laminate layer is on those vertical elements, which influences how seams and edges are detailed during shop preparation.
The phenolic back on this DecoMetal laminate is described as preventing creasing, which supports the thin metal face and helps it stay flat during cutting, routing, and bonding operations. That resistance to creasing matters when handling decorative aluminum or copper finishes, because it helps maintain a clean visual line across panels and joints on finished vertical interior applications. The phenolic back also allows for improved adhesion to substrates, which means the rear surface is tailored for bond strength during fabrication rather than relying on bare metal. This design makes the bond interface more predictable, helping maintain attachment between the decorative surface and the core over time. The defined 0.040 inch, or 1.0 mm, thickness gives fabricators a known value when setting up tooling and planning transitions to other surfacing materials in the same installation.
DecoMetal Laminate 3721 Platinum Linework is a Formica Corporation metal laminate that uses aluminum or copper sheet with a phenolic back, providing a decorative metal face for vertical interior applications.
The Formica DecoMetal laminate uses polished, anodized, matte, brushed, or mirror aluminum or copper on the face with a phenolic back, combining appearance on the front with a stable backing for bonding to substrates.
The DecoMetal laminate is described as Grade 85 at 0.040 inch, or 1.0 mm thick, indicating the overall laminate thickness that affects edge buildup and alignment with neighboring materials.
The phenolic back on the DecoMetal laminate prevents creasing and allows for improved adhesion to substrates, which supports a flatter surface and a more consistent bond on vertical interior work.
The DecoMetal laminate is engineered for vertical interior applications, directing it toward upright surfaces such as interior wall areas or other vertical design elements.
The Platinum Linework DecoMetal laminate with design number 3721 is manufactured by Formica Corporation, placing it within the Formica DecoMetal laminate product family.
DecoMetal Laminate 3721 Platinum Linework in Grade 85 provides a defined 0.040 inch (1.0 mm) metal laminate construction from Formica Corporation, which supports planning around edge buildup and finish transitions on vertical interior applications. The combination of aluminum or copper sheet with a phenolic back brings together decorative metal appearance and a backing designed to prevent creasing and support adhesion to substrates. For projects calling for Formica DecoMetal laminate in a Platinum Linework aesthetic on upright surfaces, this product data provides the key construction and use details needed for design and fabrication decisions.
Sold In: 1 Each