Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amana flush trim plunge router bit gives you a 1-1/4 inch diameter cutting edge sized for trimming to patterns or edges in one clean pass. The 3-3/8 inch length provides extended reach along taller edges, which supports template work on thicker stock or stacked laminations. A 1/2 inch shank matches common professional routers, helping the bit seat securely in heavier-duty collets for smoother cutting. This router bit is built as a plunge bit, so the geometry is designed to enter the work from above, which lets you start inside a panel where an edge is not available. As a template router bit, it is intended to follow a guide surface so repeated parts match, which matters when producing multiple identical components. The Amana Tool brand identity signals a purpose-built router bit for trim, pattern, and flush work in a woodworking setting.
This flush trim plunge template router bit uses a 1/2 inch shank, so it fits router collets designed for that shank size and locks in place for pattern work. The upper ball bearing at the top of the bit is positioned to run against a template placed above the workpiece, which means the template location is set by the bearing rather than the cutting flutes. As a plunge bit, the cutting end is built to enter the material from above, which lets the operator lower the bit into a starter area and then move to the template edge. The 3-3/8 inch length affects how far the bit projects from the collet, which is important when setting the router depth so the cutting diameter lines up with the template.
This flush trim plunge template router bit is suited to jobs where a pattern or template controls the final shape. The upper ball bearing rides along the template face, so the cutting flutes match that path on the workpiece below. The 1-1/4 inch diameter cutting profile is sized for trimming and flushing operations where you want the surface of the work to align precisely with the guide edge. On taller work or laminated assemblies, the 3-3/8 inch length lets the cutting area run along more of the edge in a single pass, reducing the need to reposition the template. The 2-flute arrangement provides two cutting edges per rotation, supporting balanced cutting on curves typical of template routing. Because this bit is classified under router bits and trim bits, it fits naturally into routing setups focused on edge trimming and pattern duplication.
The Amana Tool identity and specific part number 45367 distinguish this bit for repeat ordering when a particular setup performs well, which matters when matching cuts across multiple projects. The 1/2 inch shank contributes to a more rigid connection between router and cutter, which supports more consistent flush trimming along long edges. The plunge bit designation means the cutting end is intended to cut as it enters, so the operator can start the cut inside the work area and move outward to meet the template instead of starting only from an edge. With the bearing located at the upper end, the template can sit on top of the workpiece, which simplifies layout when multiple parts are stacked beneath a single pattern. Together, the diameter, length, shank size, bearing position, and two-flute layout define how this router bit behaves in trim and template applications.
The Amana 45367 is a flush trim plunge template router bit, so it is designed for routing operations that follow a pattern to create matching parts.
The upper ball bearing runs against a template placed above the workpiece, guiding the 1-1/4 inch cutting diameter so the trimmed edge matches the template shape.
The 1-1/4 inch diameter provides a wide cutting path, which helps bring the workpiece edge flush to the template in fewer passes on broader edges.
The 1/2 inch shank matches routers built for heavier bits, helping keep the flush trim plunge template router bit stable during trimming operations.
The 3-3/8 inch length lets the routing setup reach deeper along edges, which is useful when trimming thicker or stacked material against a template.
The two flutes share the cutting load around the bit, which helps maintain a smoother cutting action along template-guided edges.
The Amana 1-1/4 inch x 3-3/8 inch flush trim plunge template router bit with upper ball bearing, 2-flute layout, and 1/2 inch shank is tailored for pattern-guided trimming. Choosing this specific Amana Tool 45367 part number aligns your router setup with template-focused work where diameter, length, shank size, and bearing position determine how accurately finished parts follow a pattern.
Sold In: 1 Each