Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
2-1/2 x 2-1/2 corner protector describes a Tenn-Tex Plastics, Inc. plastic corner protector sized to cover typical cabinet corners, so the edge of the cabinet stays shielded when the load shifts in transit. The product is designed to protect the corners of cabinets while shipping the cabinets, so the vulnerable 90 degree edges are guarded against impact and strapping pressure during handling. The protector fits 90 degree cabinet corners, which lets it sit square on standard cabinet geometry and hold position as cabinets are moved or stacked. The black material finish identifies this protector visually on the job site, which helps crews see that the corner protection is in place when staging or loading. Sold in per box quantities with 750 pieces per box, this format supports higher volume cabinet shops that need consistent corner protection across multiple units in each outbound shipment.
The corner protector fits 90 degree cabinet corners, so it aligns with square cabinet construction and helps the protector stay in place as cabinets are moved in and out of trucks or storage. The 2-1/2 x 2-1/2 dimension gives each leg of the protector enough reach over the cabinet edges, so the contact from straps or adjacent loads is transferred onto the plastic instead of the cabinet material. Because the protector material is plastic, it adds a firm yet forgiving interface against typical shipping contacts, which supports routine handling while the cabinet corners remain covered. The black finish makes the protector stand out against lighter cabinet finishes, so crews can locate protected edges quickly when planning how to stack or position cabinets in a load.
This Tenn-Tex Plastics, Inc. 2-1/2 x 2-1/2 corner protector is designed to protect the corners of cabinets while shipping the cabinets, so it fits naturally into workflows that move finished cabinets from shop to job site. Because it fits 90 degree cabinet corners, it works on standard square cabinet construction where two panels meet at a right angle, allowing the protector to cap that junction while cabinets are staged, loaded, and unloaded. The plastic material handles repeated contact during typical shipping steps, so crews can set cabinets against each other or against truck walls with the protector taking the initial contact at the corner. The black color of the protector provides visual contrast on many cabinet finishes, so installers and shop teams can orient cabinets by eye and read the protected edges quickly when navigating tight spaces.
The 2-1/2 x 2-1/2 corner protector footprint gives a consistent coverage area along both sides of the cabinet corner, so when cabinets are strapped or positioned, the load transfers toward the plastic instead of directly into the cabinet edges. This repeatable coverage helps maintain similar protection from cabinet to cabinet, which supports predictable results when multiple units travel together. The plastic construction gives each T-430-02 corner protector a uniform profile, so every piece sits the same way on matching cabinet corners and helps create a regular buffer around the edge. Because the design is specifically described as protecting cabinet corners while shipping the cabinets, it aligns with workflows where corner protection is a standard step between assembly and loading, helping shops maintain a consistent method across many shipments. The Tenn-Tex Plastics, Inc. branding and T-430-02 manufacturer part number identify the protector clearly in ordering and inventory systems, which supports easy restocking and repeat use on future cabinet runs.
The corner protector fits 90 degree cabinet corners, so it seats properly on standard right-angle cabinet edges used in typical cabinet construction.
The 2-1/2 x 2-1/2 corner protector covers each side of the cabinet corner with a 2-1/2 inch leg, so more of the edge is shielded during shipping and handling.
The corner protector material is plastic, so it creates a smooth barrier between the cabinet and other surfaces during standard cabinet shipping operations.
The product is designed to protect the corners of cabinets while shipping the cabinets, so it is applied to cabinet corners before transport.
The corner protector is black, so it shows clearly on many cabinet finishes and is easy to identify on loaded cabinets.
The product is sold in per box quantities with 750 pieces per box, so one box supports corner protection for many cabinets in a production run.
The Tenn-Tex Plastics, Inc. 2-1/2 x 2-1/2 corner protector brings a plastic shield to 90 degree cabinet corners, so finished edges stay guarded during transport. With black color for quick visibility and 750 pieces per box for volume work, it supports consistent cabinet corner protection across ongoing shop-to-job shipments. Choosing the T-430-02 part number aligns your process with a defined size, material, and fit, so cabinet handling stays predictable from one shipment to the next.
Sold In: 1 Each