Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rehau PVC edgebanding identified as 303334-575 provides a dedicated PVC edge treatment for panels, giving exposed board edges a finished working surface that supports professional cabinet and furniture builds. The WA 4880 Carbon Mesh reference in the SAP description defines the specific design family, so installers can match this edgebanding to panels that use the same WA 4880 Carbon Mesh appearance in ongoing or repeat projects. The 1-5/16 inch width stated in the SAP description covers common board thicknesses while allowing a bit of trimming, so edges can be flushed accurately to the panel face after bonding. The 3mm thickness listed in the product description defines the build of the band, giving a substantial profile at the edge that can stand up to normal shop handling once installed. The 300 unit length noted in the SAP description identifies this as a long run format suitable for multi-cabinet or multi-panel work where consistent material is important across every edge.
The SAP description listing 1-5/16 for width gives installers a working margin over typical panel thickness, so the Rehau PVC edgebanding can be applied, then trimmed back cleanly on both faces. The 3mm thickness in the same description defines how much PVC stands proud of the core before trimming, which influences tool setup when dialing in edge trimmers or flush-routing operations. The 300 run length identified in the SAP description supports longer uninterrupted pulls along cabinet sides or tall panels, reducing joints in the edge line when laying out work. Together, these specified dimensions let shops organize cutting, bonding, and trimming steps around a known band size, so repeat runs using the same 303334-575 edgebanding can follow the same process settings.
The product class "Edge Banding" and category placement under edgebanding define this Rehau, Inc. item as a band for finishing raw panel edges, so it fits naturally into cabinet, furniture, and casework builds that rely on sheet goods. The WA 4880 Carbon Mesh wording in the SAP description identifies a specific design family, helping shops tie this Rehau PVC edgebanding to boards or laminates that share the same WA 4880 Carbon Mesh visual reference in a project set. With its 1-5/16 width, the band is sized for application along exposed sides, tops, bottoms, and shelves cut from common panel thicknesses, giving enough overhang for trimming tools to produce flush, straight edges. The 3mm thickness creates a defined edge profile once trimmed, which suits projects that call for a noticeable PVC edge treatment rather than a very thin skim.
The manufacturer part number 303334-575 provides a stable identifier for this specific WA 4880 Carbon Mesh 1-5/16X3MMX300FLX band, so shops can reorder the same Rehau PVC edgebanding and expect the same working dimensions on repeat jobs. The SAP description combines design family, width, thickness, and run length in a single line, letting estimators and installers reference one code when tying edgebanding to cut lists or labeling storage locations. The 1-5/16 width and 3mm thickness act as known setup values, so once trimming stations and routers are dialed in for this band, those settings can be reused whenever another roll of 303334-575 is pulled into production. The 300 length notation supports continuous edging along multiple parts from the same run, which helps maintain a uniform WA 4880 Carbon Mesh appearance across cabinet banks or matching furniture pieces. Together, these defined specs help streamline layout, application, and repeat work wherever this Rehau, Inc. PVC edge banding is specified.
Rehau 303334-575 is PVC edgebanding in the Edge Banding product class, so it is used to cover exposed panel edges on cabinets, furniture, and similar casework projects.
WA 4880 Carbon Mesh in the SAP description identifies the specific design family of this Rehau PVC edgebanding, so it can be matched to projects using the same WA 4880 Carbon Mesh reference.
The SAP description states 1-5/16 width, giving enough coverage over common panel thicknesses so the edgebanding can be bonded and then trimmed flush on both faces.
The SAP description lists 3mm thickness, which defines the edge profile and informs trimming and routing setup when finishing the banded panel edges.
The 300 in "1-5/16X3MMX300FLX" identifies a long run length format, helping shops plan multi-panel edging from one continuous Rehau PVC edgebanding roll.
The product name and brand fields list Rehau, Inc. as the manufacturer, so 303334-575 is a Rehau PVC edgebanding within their edge banding line.
The identified Rehau PVC edgebanding 303334-575 combines WA 4880 Carbon Mesh design, 1-5/16 width, 3mm thickness, and 300 run length in one clearly specified band, so shops can plan edging work around stable, repeatable dimensions. For projects built from sheet goods that call for a matching WA 4880 Carbon Mesh edge treatment, this Edge Banding product class entry gives installers a named PVC option from Rehau, Inc. aligned to that reference. Using the defined measurements and part numbers, buyers can tie cut lists, job notes, and storage labels directly to this Rehau PVC edgebanding when organizing cabinet, furniture, or general woodworking production.
Sold In: 1 Roll