
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Rehau PVC edgebanding 301021-283 is a PVC edge banding from Rehau, Inc. that covers and finishes raw board edges so panels present a uniform Aged Ash appearance. The FO 8844-WR Aged Ash designation identifies the specific visual design, which helps match this strip to other Aged Ash components on a project. The 15/16 x 3MMX300FLX size description shows it is designed as a 15/16 inch wide, 3 mm thick flexible length, giving enough coverage over typical panel thickness while providing a substantial edge profile. As an edge banding product within the edgebanding category, it serves as the finishing component in assembled casework, doors, or shelving where exposed substrate edges would otherwise be visible. The PVC construction defines it as a synthetic edging material, supporting consistent fabrication when working alongside other PVC-based products in the shop.
The 15/16X3MMX300FLX description on this Rehau PVC edge banding provides the essential dimensional information needed for setup. The stated 15/16 inch width allows operators to select trimming tools that leave a clean, flush finish along panel faces. The 3 mm thickness factor gives technicians a clear sense of the edge build, informing settings where the band transitions against adjacent doors, drawer fronts, or carcass parts. Because it is identified as PVC edgebanding, it fits workflows designed around PVC material behavior during cutting and post-processing. Together, these details support repeatable setup decisions when this FO 8844-WR Aged Ash strip is added into an existing edgebanding program.
This Rehau PVC edgebanding, identified by manufacturer part number 301021-283, fits work where a FO 8844-WR Aged Ash edge treatment is required across exposed panel edges. The product sits in the Edge Banding class and Edgebanding category, positioning it for use in woodworking assemblies such as casework, shelving, and similar panel-based constructions that rely on edging to finish raw sides. The 15/16 inch width indicated by 15/16X3MMX300FLX aligns with panel formats that need full edge coverage while leaving slight overhang for trimming. The Aged Ash description supports projects that are coordinated around this design reference, allowing the same visual tone to carry across faces and edges where this banding is applied.
The dimensional combination described as 15/16X3MMX300FLX in the SAP description gives fabricators predictable results once settings are dialed in. The 15/16 inch coverage works with established edgebanding equipment paths that expect a near-inch-wide strip, which helps minimize adjustment when changing from other similar widths. The 3 mm thickness provides a defined, solid edge profile, which can influence how edges align with adjacent components in finished cabinetry or furniture runs. Identifying the product specifically as Rehau PVC edgebanding, model 301021-283, also streamlines part tracking and repeat ordering when the FO 8844-WR Aged Ash look has been approved for a program or customer standard. This combination of known dimensions and clear identity supports repeat jobs using the same setup parameters.
Rehau PVC edgebanding 301021-283 is PVC edge banding, so it uses PVC material for the edging strip, supporting workflows built around PVC machining and finishing.
The FO 8844-WR Aged Ash description identifies the specific Aged Ash design of this edge banding, helping projects maintain the same visual reference across edges and related components.
Rehau 301021-283 is described as 15/16X3MMX300FLX, with the 15/16 indicating a 15/16 inch width that covers common panel edges with extra material for trimming.
The 3 mm thickness in the 15/16X3MMX300FLX description provides a relatively thick edge profile, which affects the visual thickness and feel of finished panel edges.
The 300FLX portion of the description identifies this PVC edgebanding as a flexible length, allowing longer runs to be edged in a continuous strip when compatible with shop processes.
As an Edge Banding product in the Edgebanding category, this strip serves to finish and cover raw panel edges so assemblies present a uniform, specified Aged Ash edge appearance.
The Rehau PVC edgebanding 301021-283 combines a defined FO 8844-WR Aged Ash design with a 15/16X3MMX300FLX format, giving projects both a known visual reference and predictable edge dimensions. The Edge Banding product class and PVC construction align this strip with standard edgebanding workflows in woodworking shops. When a job calls for an Aged Ash edge treatment that matches this description, choosing this specific Rehau 301021-283 part number allows that requirement to be met with a clearly identified edging component.
Sold In: 1 Roll