Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formica IdealEdge 6320-46 Black Fusion defines this decorative laminate edge molding as a specific match to a Black Fusion Etchings finish, so you can carry the same visual across your top surface and edge. The 1-1/2 inch height gives coverage for standard laminate edge build-ups, which helps conceal the substrate and any glue lines along the edge run. The 144 inch length lets you run long counters or casework edges with fewer joints, which reduces layout time and keeps the finished edge visually cleaner. The double radius profile shapes both top and bottom corners of the edge, which softens the transition between the laminate face and the vertical edge strip. As a laminate edge molding from Formica Corporation, it ties into the broader Formica surfacing system, which supports consistent color and pattern alignment on projects that already use matching Formica sheets.
This Formica IdealEdge laminate edge molding uses a 1-1/2 inch height that lines up well with many laminate build-ups, which simplifies trimming and flush-routing after bonding. The 144 inch length gives room to cut multiple shorter sections from one piece, which can streamline shop cutting sequences when laying out several cabinet or counter edges. As a laminate edge molding, the material is intended to be bonded along the exposed edge of laminate constructions, which keeps fabrication steps consistent with other laminate operations. The double radius form gives a defined curve at both exposed corners of the edge, which guides flush trimming and profile cleanup so the finished edge follows a predictable shape from top to bottom.
This Formica IdealEdge 6320-46 Black Fusion Etchings finish molding is suited to projects that specify the same Black Fusion Etchings pattern on flat laminate, because the coordinated finish helps the edge read as part of a single surface. The 1-1/2 inch H x 144 inch L dimension sets it up for longer countertop runs, wide cabinet tops, or shelving edges where a continuous decorative edge is required along the front. As a decorative edge molding in the laminate edge moldings family, it functions as the finished face at the edge of the panel, so the underlying core and build-up details stay concealed behind a consistent Formica surface. The double radius edge shape defines how the front edge presents to the user, with both upper and lower curves giving a softer touch point wherever people contact the edge.
The double radius edge design on this Formica double radius edge molding sets a fixed profile that can be followed with common trimming and sanding steps, which supports consistent results across multiple pieces on the same job. With a 1-1/2 inch height, the molding offers enough material to cover typical laminate build-ups while still giving margin for trimming, which helps maintain a clean finished reveal even when the substrate varies slightly. The 144 inch length allows fabricators to nest several smaller parts into one stick when layout permits, which can reduce offcuts and concentrate cutting work at one station in the shop. Identifying this product as part of the decorative edge moldings group signals that it is intended as a visible design element as well as a protective edge, which supports using it anywhere the front edge will be regularly seen and touched.
The Formica IdealEdge 6320-46 Black Fusion molding measures 1-1/2 inches in height and 144 inches in length, which suits standard laminate build-ups and longer edge runs on counters or casework.
This Formica IdealEdge 6320-46 Black Fusion piece is a laminate edge molding in the decorative edge moldings category, used as a finished trim along exposed laminate edges.
The double radius profile shapes both the top and bottom corners of the edge, which produces a rounded, softened front profile instead of sharp laminate corners.
This laminate edge molding uses the Black Fusion Etchings finish, which aligns with Formica surfaces specified in the same Black Fusion Etchings design.
The Black Fusion IdealEdge molding is manufactured by Formica Corporation, tying it to the broader Formica laminate and surfacing product family.
The manufacturer part number is 063202046E12000, which identifies this specific Black Fusion Etchings double radius, 1-1/2 inch by 144 inch Formica IdealEdge molding.
This Formica IdealEdge laminate edge molding from Wurth Baer Supply provides a 1-1/2 inch high, 144 inch long Black Fusion Etchings option for laminate edge runs. When a project calls for a coordinated Formica Black Fusion finish with a double radius edge profile, this molding offers a defined size and appearance that can be planned into countertop or casework fabrication layouts.
Sold In: 1 Each
