
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Fastcap 1 inch Hardrock Maple PVC peel and stick cover cap is a screw cover cap that hides exposed screw heads in woodworking and cabinet work so visible fasteners match the surface instead of standing out on the job.
The Hardrock Maple color on this Fastcap screw cover cap matches Hardrock Maple surfaces, so installed fasteners visually blend with panels and doors and help finished work look consistent across every cabinet run.
The PVC material in this Fastcap PVC peel and stick cover cap forms a thin, conforming cap over screw heads, so the cap lays over minor surface variation and gives a clean, low-profile cover on cabinet sides, bottoms, or face frames.
The peel and stick design on this Fastcap cover cap uses an adhesive-backed face instead of a mechanical clip, so installers place and press each cap quickly over a fastener location and keep their workflow simple during final trim-out.
The MINI BOX 1 H.R. MAP PVC SCR COV CAP ADH description identifies this product as a small-quantity option of adhesive-backed Hardrock Maple PVC screw cover caps, which suits shorter production runs or targeted repair and touch-up work.
The Fastcap 1 inch Hardrock Maple PVC peel and stick cover cap uses an adhesive-backed face instead of a snap-on design, so installers position each cap directly over screw heads on cabinetry, wall panels, or similar surfaces without extra tools.
The PVC material in this Fastcap Hardrock Maple cover cap flexes over typical screw head shapes, so the cap seats against both the fastener and surrounding substrate and supports uniform contact with the adhesive surface.
The 1 inch size on this Fastcap screw cover cap allows slight placement variation over the screw location, so field installers can work efficiently on vertical or overhead cabinets where precise centering can slow production.
The Hardrock Maple color on this FC.MB.1.HM cover cap matches Hardrock Maple cabinet components, so once installed, the cap visually merges with doors, gables, and fillers for a consistent finish on both new and retrofit projects.
The Fastcap 1 inch Hardrock Maple PVC peel and stick cover cap fits woodworking situations where exposed screw heads appear on Hardrock Maple-colored surfaces, so casework sides, toe spaces, and interior cabinet panels gain a uniform look.
As a screw cover cap in the Fasteners | Screw Covercaps & Washers category, this Fastcap product suits fastener concealment on cabinet assemblies, so installers in shops or on site can bring screw-driven construction closer to a finished, furniture-like appearance.
The Hardrock Maple color on this Fastcap Hardrock Maple cover cap aligns with Hardrock Maple laminates or veneers, so it works particularly well when the surrounding panels share the same tone, reducing visual contrast around fastener locations.
The MINI BOX 1 H.R. MAP PVC SCR COV CAP ADH designation identifies a mini box quantity of Hardrock Maple PVC adhesive screw cover caps, so it serves focused applications such as matching a single kitchen, bath, or built-in unit.
The 1 inch diameter on this Fastcap PVC peel and stick cover cap provides generous coverage around screw heads, so layout tolerances during drilling are less critical and repeated installations still conceal minor position shifts around the fastener.
The peel and stick adhesive design of this 1 inch peel and stick cover cap keeps installation limited to positioning and pressing, so repetitive work across multiple cabinets follows a simple motion that supports consistent, repeatable results from cap to cap.
The PVC material on this FC.MB.1.HM Fastcap cover cap works with the adhesive backing to maintain full-surface contact over typical cabinet substrates, so each applied cap seats uniformly and presents a similar profile across an entire project.
The Fastcap brand identity on this screw cover cap ties it to a recognized line of cover caps and washers, so shops can standardize on the FC.MB.1.HM part for Hardrock Maple work and repeatedly achieve the same visual outcome on future jobs.
The Fastcap FC.MB.1.HM cover cap hides exposed screw heads on Hardrock Maple-colored surfaces, so visible fasteners blend into cabinets or panels and finished work looks more uniform.
The Fastcap 1 inch Hardrock Maple PVC peel and stick cover cap has a 1 inch diameter, so it covers the screw head and a margin around it for more forgiving placement.
This Fastcap screw cover cap is made from PVC, so it flexes over screw heads and conforms to typical cabinet substrates for a smooth, low-profile appearance.
The Fastcap PVC peel and stick cover cap uses an adhesive backing, so installers place and press each cap over screw heads without extra tools, supporting quick, repeatable application.
The FC.MB.1.HM Fastcap cover cap is Hardrock Maple, so it visually matches Hardrock Maple cabinet components and helps screws disappear against that finish.
This Fastcap 1 inch Hardrock Maple PVC peel and stick cover cap is classified under Fasteners, Screw Covercaps & Washers, so it serves as a finishing element over installed screws.
The Fastcap 1 inch Hardrock Maple PVC peel and stick cover cap gives cabinet shops and installers a color-matched way to cover screw heads on Hardrock Maple surfaces, so projects gain a finished look that aligns fasteners with surrounding materials.
With PVC construction, adhesive backing, and a 1 inch diameter, this Fastcap Hardrock Maple cover cap supports efficient concealment of cabinet screws, so selecting the FC.MB.1.HM part number aligns fastener coverage with the visual standard of Hardrock Maple projects.
Sold In: 1 Box