
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
CompX National disc tumbler cam lock gives drawers and cabinet doors a keyed locking point using a 15/16 inch cylinder length that reaches through typical furniture fronts. The cylinder length positions the cam to engage reliably with the frame, which matters when you need consistent locking on casework. A 3/4 inch mounting hole size defines the bore you cut in wood or metal, so the body seats correctly without excess play. Bright nickel finish provides a clean, neutral appearance that blends with common hinges and pulls. This lock uses a 90 degree CW rotation, so the cam swings through a quarter-turn arc, which helps match common strike locations. Key removable in both locked and unlocked positions lets you pull the key after turning either way, simplifying use in busy shops or offices where locks are cycled frequently.
This cam lock is specified for drawers and for right-hand or left-hand doors, so one part number can serve multiple cabinet layouts in a project. It fits lipped or overlay construction using a straight cam, and flush construction using a formed cam, which lets you match the cam style to the door build while keeping the same cylinder. For overlay applications, the combined thickness of front and frame cannot exceed the 15/16 inch cylinder length, so the lock reaches through the material stack and still threads properly. The 3/4 inch mounting hole dimension sets the core layout step in the workflow, which helps keep repetitive installations consistent from cabinet to cabinet.
This CompX National disc tumbler cam lock is intended for drawers plus right-hand or left-hand cabinet doors, so it fits typical storage and casework runs. Its suitability for lipped or overlay construction when paired with a straight cam lets it blend into face-frame style cabinets where the door overlays the opening. For flush construction, it works with a formed cam, which places the cam face appropriately against a flush front and frame. The overlay application limit - combined thickness of front and frame cannot exceed the 15/16 inch cylinder length - defines which door and face material stacks will accept the lock. That cylinder length also sets how far the threaded housing reaches, which matters when specifying panels and rails so the lock can secure tightly. Bright nickel finish matches many commercial cabinet environments, supporting use in offices, retail fixtures, or shop storage where hardware appearance needs to stay consistent.
The 90 degree cam turn on all locks standardizes operation, so every installed unit behaves the same when users rotate the key, reducing confusion across a facility. Key removable in both locked and unlocked positions means users can remove the key after securing or opening the cabinet, which supports key control routines or shared access situations. The keyed different code setup means each lock is pinned to a unique key code, which adds separation between cabinets when that level of control is desired. This lock will key together with all other disc tumbler locks using the D8785 key blank, so a keying plan can extend across multiple lock locations with a consistent blank profile. Master keying to E41A using the D8783 key blank allows a higher-level key to operate these cam locks, which is useful where maintenance or management access is required across many units while everyday users keep individual keys. These keying and rotation details work together to shape how the lock fits into a broader access control scheme on casework.
The CompX National disc tumbler cam lock uses a 15/16 inch cylinder length, which sets how far the body extends through the panel so the cam can engage the frame effectively.
This cam lock is designed for a 3/4 inch mounting hole, so installers drill that diameter to seat the cylinder securely in drawers or doors.
The cam lock turns 90 degrees clockwise, so a quarter-turn moves between locked and unlocked positions, aligning the cam with strikes designed for that rotation.
This CompX National cam lock is for drawers and for right-hand or left-hand doors in lipped or overlay construction with a straight cam, or flush construction with a formed cam.
The C8054-KD-14A cam lock is keyed different, meaning each lock is set to a distinct key code, which separates access between individual cabinets or drawers.
This disc tumbler cam lock will key together with other disc tumbler locks using the D8785 key blank, and it can be master keyed to E41A using the D8783 key blank.
The CompX National disc tumbler cam lock with 15/16 inch cylinder, 3/4 inch mounting hole, and bright nickel finish ties directly to drawer and door applications where keyed security is needed. Its ability to serve drawers plus right-hand and left-hand doors means one model can cover multiple cabinet types in the same job. Support for lipped or overlay cabinets with a straight cam, and flush fronts with a formed cam, lets you match construction style while holding to a single lock specification. With keyed different coding, 90 degree CW rotation, and D8785 and D8783 key blank compatibility, this C8054-KD-14A cam lock aligns well with planned key control on woodworking and casework projects.
Sold In: 1 Each