
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
The Quickscrews M6 Euro Screw is a flat head, coarse-thread fastener designed to mount European-style hinges, drawer slides, and shelf hardware into the 5 mm line-bored holes of 32 mm system cabinets. At 10 mm in length, this screw seats firmly through a hinge or slide mounting plate and into 3/4-inch cabinet panel stock without over-penetrating — a practical match for the most common panel thickness in production and custom cabinetry. Each box contains 10,000 screws in a Nickel finish.
European cabinet hardware — cup hinges, undermount and side-mount drawer slides, shelf pin clips, and similar fittings — is designed around the 32 mm system, where hardware mounts into a row of pre-bored 5 mm holes spaced 32 mm apart on the interior panel faces. The M6 euro screw is the standard fastener for that system. The 10 mm length is the go-to choice when installing hardware on panels milled from 3/4-inch (19 mm) stock, which is the dominant thickness in both frameless and face-frame cabinet construction. The screw passes through the mounting plate and threads into the panel with enough engagement to hold the hardware firmly under daily load without risking blowout on thinner backs or applied end panels.
The Nickel finish coordinates visually with the zinc and chrome hardware typical of European hinges and slides, so fastener heads that land in visible positions inside the cabinet stay inconspicuous. The flat head profile sits flush against the hardware plate rather than standing proud, which matters when a hinge arm needs clearance or a slide must track without obstruction. The #2 Pozidriv drive provides parallel-flank engagement that resists cam-out under the repetitive driving cycles common in production settings — an advantage over Phillips in high-volume work where bit slippage slows the line and damages plate finishes.
Cabinet shops running production on frameless or face-frame boxes keep euro screws in bulk because hardware installation is one of the last steps before a job ships — running out mid-run is not an option. A 10,000-piece box is sized for that reality. Custom shops building in smaller batches appreciate the consistent fit: the M6 coarse thread and blunt point drop cleanly into a freshly line-bored hole without requiring a pilot-finding step, keeping installation fast across a full kitchen or bath run. Installers pulling hardware off a truck and mounting it on site get the same benefit — a screw that starts reliably and drives flush in a single motion.
Most cabinet carcass panels are milled from 3/4-inch (19 mm) stock. A 10 mm euro screw passes through the hardware mounting plate and threads into the panel with adequate engagement while leaving a safe margin from the back face. Longer screws risk breaking through thinner panels or applied end panels.
Euro screws are designed for use in pre-bored 5 mm line-bore holes, not for driving into undrilled wood. The blunt point is matched to that system — it starts cleanly in the existing hole and threads in without tearing the opening. It is not intended to self-drill.
A Pozidriv recess has additional ribs between the four main arms, creating an 8-point engagement with parallel flanks. Unlike a Phillips driver, a correctly matched Pozidriv bit does not cam out under load. For production installation where the same motion is repeated hundreds of times in a shift, that resistance to cam-out reduces bit wear and plate damage.
The M6 thread and 5 mm shank are the standard for 32 mm system hardware across European hinge and slide manufacturers. The screw is not brand-specific, but confirm that the mounting plate holes in your hardware are sized for M6 before ordering.
Yes. Euro screws are installed inside cabinet carcasses in dry, interior conditions. The Nickel finish provides adequate protection for that environment and matches the appearance of the hardware it secures.
When the job is mounting European hinges, drawer slides, or shelf hardware on standard 3/4-inch cabinet panels, the Quickscrews M6 10 mm Euro Screw delivers a consistent start, a flush seat, and the bulk quantity to keep production moving without interruption.
Sold In: 1 Each