Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Quickscrews #8 x 1/2-inch washer head screw is a dedicated installation fastener for European cup hinges, drawer slides, and similar cabinet hardware. Its wide washer head seats cleanly over hardware mounting plates without pulling through, and the Phillips drive works with the standard bits already on every installer's belt.
This screw is sized and headed specifically for attaching European cup hinges, side-mount drawer slides, and other cabinet hardware to panel interiors. The 1/2-inch length is matched to the shallow penetration that hardware mounting plates require — enough thread engagement to hold firmly without punching through a 3/4-inch panel. The washer head spans the counterbore or slot in most standard hinge plates and drawer slide brackets, holding the hardware flat and preventing the head from sinking into or tearing the panel face.
The zinc plating on this screw is appropriate for the controlled, dry environment inside a cabinet box. It keeps the fastener from reacting with the panel substrate or leaving rust streaks on white melamine interiors. This is an indoor screw — for installations in areas with sustained moisture exposure, a corrosion-resistant finish would be the right choice.
Cabinet shops assembling and installing production runs of face-frame and frameless cabinetry are the natural fit here. When you are setting hinges and hanging drawer slides across dozens of boxes in a day, running out of mounting screws is a real interruption. The 14,000-count box removes that variable. Installers working from a van or staging area will also appreciate having one reliable screw that handles both hinges and slides rather than sorting through two separate bags on the job.
Yes. The #8 gauge and washer head are sized to seat properly in the mounting holes of most European cup hinge plates and side-mount drawer slide brackets commonly used in residential and commercial cabinetry.
Hardware mounting plates sit on the surface of 3/4-inch panels. A 1/2-inch screw provides solid thread engagement in the panel without risking breakthrough on the opposite face, which matters on visible cabinet interiors.
Yes. Coarse thread is well suited for particleboard, MDF, melamine-faced panel, and plywood — the substrates most commonly used for cabinet boxes and sides.
No. This screw is designed for hardware mounting. Face-frame and pocket-hole joinery call for a pan or washer head pocket-hole screw with the correct thread, length, and point for that application.
Each box contains 14,000 screws — a production quantity suited to cabinet shops and installers who go through mounting screws at volume.
When the hardware is right and the screw is right, mounting hinges and slides becomes a repeatable, low-friction part of the job. This Quickscrews washer head installation screw is that dependable constant — a straightforward fastener sized for the task, stocked in quantities that match how cabinet shops actually work.
Sold In: 1 Each