Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formica IdealEdge 271-46 Blackstone defines this bullnose laminate edge molding as a coordinated finish piece for laminate projects where a smooth, rounded front profile is required. The Blackstone Etchings finish bullnose edge molding ties into matching Formica laminate patterns so the front edge reads as a continuous surface, which supports a professional, finished look on countertops, tables, or work surfaces. The 1-1/2 inch height gives coverage for common substrate build-ups, helping the installer transition from horizontal laminate to the vertical edge in one clean line. At 144 inches in length, a single stick spans typical cabinet runs or worktops, which reduces seams along the front edge and keeps layout straightforward on longer projects. As a laminate edge molding from Formica Corporation, it fits into laminate-based fabrication workflows where consistent color, pattern, and profile are important for repeatable shop results.
This Formica IdealEdge bullnose edge molding, at 1-1/2 inches high, works into laminate builds where the substrate and deck thickness fall within that coverage, letting the front face be trimmed flush after bonding. The 144 inch overall length gives fabricators flexibility to size pieces for individual cabinet sections or run full lengths on straight countertops before cutting returns. As a laminate edge molding, it is designed to be worked using standard laminate shop tools for cutting, edge trimming, and flush-finishing operations. The consistent bullnose profile along the stick supports jig-based setups, so repetitive cuts and miters track the same radius from piece to piece across a job.
Formica IdealEdge 271-46 Blackstone Etchings finish bullnose edge molding is suited to laminate countertops, furniture tops, and similar laminate work surfaces where a matched Blackstone visual is desired across deck and edge. The 1-1/2 inch height gives coverage from the top laminate surface down the front build-up, which helps when wrapping edges on kitchen, bath, or commercial tops using common laminate construction thicknesses. The 144 inch length lets shops handle long straight runs, then cut to smaller segments for shorter cabinets, tables, or return legs while maintaining the same Blackstone Etchings finish from piece to piece. As a laminate edge molding from the Formica Corporation line, it fits into projects already specified with 271-46 Blackstone patterns, keeping color and pattern continuity from horizontal surface to front radius.
The bullnose edge molding profile on this Formica IdealEdge piece creates a continuous rounded front edge, which helps fabricators align their laminate seams at a controlled radius instead of a sharp break. The consistent bullnose shape along the 144 inch stick supports accurate mitering at corners, because each cut references the same radius and face geometry, allowing cleaner transitions at inside or outside corners. With a 1-1/2 inch height, the edge provides a defined dimension to work against when planning substrate build-ups, so installers can match the edge height to the combined thickness of deck laminate and core materials. The Blackstone Etchings finish carried over the bullnose means that, once the edge is bonded and trimmed, the visual field across the front is a continuous 271-46 Blackstone look, which supports repeatable aesthetic results on multi-unit or production runs.
This Formica IdealEdge Blackstone Etchings finish bullnose edge molding is 1-1/2 inches high and 144 inches long, so it can span typical countertop runs or be cut down for shorter sections.
This Formica Corporation molding uses a bullnose edge profile, creating a rounded front edge that supports a smooth transition from the laminate deck to the vertical edge face.
The 271-46 Blackstone molding uses the Blackstone Etchings finish, so it aligns visually with Formica laminate designs specified in that Blackstone Etchings pattern on tops or panels.
The 1-1/2 inch height gives vertical coverage suited to many laminate build-ups, letting installers cover the edge from deck surface down to the core while trimming flush.
The 144 inch length lets fabricators run this molding across long counters or cut multiple shorter pieces from one stick, improving material yield on laminate projects.
Manufacturer part number 002712046D12000 identifies this specific Formica IdealEdge 271-46 Blackstone Etchings finish bullnose edge molding within the laminate edge moldings line.
Formica IdealEdge 271-46 Blackstone Etchings finish bullnose edge molding, at 1-1/2 inches high and 144 inches long, gives laminate shops and installers a defined bullnose profile that aligns with Blackstone-pattern projects. For runs where a coordinated Formica Corporation laminate edge molding is required, its combination of height, length, and Blackstone Etchings finish supports efficient fabrication and consistent visual results from one job to the next.
Sold In: 1 Each
