Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formica IdealEdge 271-46 Blackstone defines this laminate edge molding as a color- and pattern-matched way to finish exposed edges on laminate tops and panels. The Blackstone Etchings finish provides a coordinated decorative surface that visually carries the laminate design over the edge, which helps projects read as one continuous surface rather than a top with a separate band. The 1-1/2 inch height gives coverage for standard top build-ups or thicker panels where a deeper edge is required, reducing exposed substrate along the face. The 144 inch length allows long, uninterrupted runs on counters or work surfaces, which reduces seams and potential weak points along the edge. As a laminate edge molding from Formica Corporation, this profile integrates into laminate-based fabrication workflows where installers need a factory-produced edge detail instead of fabricating a profile from sheet stock.
This double radius edge molding uses a profile with two rounded edges, which supports applications where both the top and bottom of the edge need a softer corner rather than a sharp arris. The 1-1/2 inch height gives installers a known face dimension to design around when stacking laminate, build-up stock, or core materials, so layouts can reference a consistent edge size. With a 144 inch length, fabricators can plan edge runs along full counters or panels in one piece, reducing layout time spent aligning multiple shorter segments. Because this product is a laminate edge molding from Formica Corporation, it slots into standard laminate trimming and routing workflows that shops use to flush edges and finish corners.
This laminate edge molding belongs to the Decorative Edge Moldings category, positioning it for use where the visual presentation of the laminate edge is part of the finished design. The Blackstone Etchings finish ties it to projects using the same Formica design on horizontal or vertical surfaces, so the edge can visually extend that scheme. With its 1-1/2 inch height, the profile suits situations where the front build-up of a top or the thickness of a panel needs a deeper edge face to hide core layers. The 144 inch length supports applications such as long countertops, workbenches, or extended shelving runs, letting installers span those edges with a single molding piece and maintain an unbroken decorative line.
The double radius design on this edge molding creates two rounded transitions, which helps produce a more finished feel at the hand-contact points and reduces the visual harshness of square corners. As a laminate edge molding within Formica Corporations IdealEdge offering, it provides a pre-defined profile that can save fabrication time compared with shaping similar contours from laminate sheet. The 1-1/2 inch height gives a predictable face dimension that fabricators can repeat across multiple units in a run, supporting consistent reveals and appearance across a job. The 144 inch length minimizes the number of field joints along an edge, which can simplify setup, reduce joint finishing work, and help maintain a cleaner pattern alignment along the Blackstone Etchings finish.
The Formica IdealEdge 271-46 Blackstone edge molding finishes exposed laminate edges, so countertops or panels with the Blackstone design can carry that look over the edge for a coordinated appearance.
The edge molding is 1-1/2 inches high, giving enough face depth to cover typical laminate build-ups or thicker panel fronts where a deeper decorative edge is desired.
This Formica IdealEdge molding is 144 inches long, allowing long counter or panel edges to be finished in a single run, which reduces edge joints along the length.
Double radius on this molding indicates both the top and bottom edges are rounded, creating a smoother profile that softens the feel and look of the finished edge.
The Blackstone Etchings finish coordinates with Formicas Blackstone design, so projects using that pattern can extend the same look over the edge profile.
This molding is in the Laminate Edge Moldings product class, placing it within laminate-focused fabrication setups common in countertop and surfacing work.
This Formica IdealEdge 271-46 Blackstone laminate edge molding offers a 1-1/2 inch high, 144 inch long double radius profile in the Blackstone Etchings finish, giving installers a defined way to carry that specific Formica design cleanly over exposed laminate edges.
Sold In: 1 Each
