Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rehau PVC edgebanding FO 9484 Oxidized Beamwood 15/16 x .018 provides a PVC edge banding solution matched to an oxidized beamwood design, so cabinet and panel edges visually tie in with that specific surface pattern on finished work.
The 15/16-inch width gives coverage across common panel thicknesses with some overhang, allowing installers to trim back to a clean line and keep edges looking consistent across doors, drawer fronts, and casework.
The .018-inch thickness keeps the edgebanding slim, which helps panels maintain their overall dimensions while still covering exposed substrate edges around kitchens, offices, or built-ins using the FO 9484 Oxidized Beamwood finish.
This Rehau PVC edgebanding is identified by manufacturer part number 302164-378, giving shops and installers a precise reference when matching existing projects or reordering for repeat work.
As part of the edge banding class within edgebanding products, this FO 9484 Oxidized Beamwood material supports a finished look on raw board edges in woodworking and laminate-based construction.
The 15/16-inch width on this Rehau PVC edgebanding gives coverage that extends past standard board faces, so after bonding, installers can trim back to the substrate and leave a straight, flush edge on cabinets and panels.
The .018-inch thickness keeps the edge profile fine, which helps maintain tight reveals between parts while still covering exposed core along door and drawer edges in FO 9484 Oxidized Beamwood layouts.
Because it is classified as edge banding within the edgebanding category, this product is intended to finish open board edges, allowing fabricators to align the PVC edge with the matching oxidized beamwood surface design.
This Rehau PVC edgebanding in FO 9484 Oxidized Beamwood is suited to woodworking and laminate-based projects where the surface design matches the same FO 9484 pattern, so edge treatment carries the look across doors, ends, and panels.
The 15/16-inch width supports use on common casework and cabinet components, giving enough coverage to handle slight panel thickness variations while still trimming down to a neat, square edge for finished parts.
In shops using oxidized beamwood-themed layouts, the 302164-378 part number provides a direct reference when specifying edge treatment on drawings and production lists, helping teams call out the correct banding during fabrication.
Because it sits in the edge banding product class, this PVC strip targets exposed board edges around furniture, fixtures, and built-in pieces, allowing those edges to visually match FO 9484 Oxidized Beamwood surfaces.
The FO 9484 Oxidized Beamwood designation ties the edgebanding to a defined appearance, which helps reduce variation when different batches are pulled for large cabinet runs or future add-on work.
The .018-inch thickness influences how panel edges feel and align, letting fabricators keep door and drawer gaps closer to design intent when edging multiple sides of a component.
The 15/16-inch width also gives some working tolerance during application, so slight misalignment at bonding can still be corrected when trimming to the final edge, supporting cleaner visual lines across stacked fronts.
Using the Rehau, Inc. brand and the specific 302164-378 part number together provides a straightforward way to standardize edge banding selection on FO 9484 Oxidized Beamwood projects across estimating, purchasing, and production.
The Rehau PVC edgebanding 302164-378 is FO 9484 Oxidized Beamwood edge banding, so it finishes exposed panel edges to coordinate with that specific oxidized beamwood surface design.
This FO 9484 Oxidized Beamwood PVC edgebanding is 15/16 inch wide by .018 inch thick, giving coverage for typical panel edges while keeping a slim profile at joints.
The 15/16-inch width provides slight overhang past panel faces, so installers can trim back after bonding and leave clean, straight edges on cabinets and casework.
The .018-inch thickness keeps the edge low profile, helping assembled doors and drawer fronts maintain their designed clearances while hiding exposed substrate.
FO 9484 Oxidized Beamwood identifies the specific design this PVC edgebanding matches, so edges align visually with panels using the same oxidized beamwood finish.
The manufacturer part number 302164-378 provides a precise code for specifying, ordering, and repeating this Rehau FO 9484 Oxidized Beamwood PVC edge banding.
This Rehau PVC edgebanding FO 9484 Oxidized Beamwood 15/16 x .018 links directly to the 302164-378 part number, giving shops a clear way to match edge treatment to oxidized beamwood designs across cabinets, panels, and repeat projects.
The combination of 15/16-inch width and .018-inch thickness supports tidy trimming and controlled edge profiles, so woodworkers can carry the FO 9484 look consistently around exposed board edges in their finished installations.
Sold In: 1 Lineal Ft