Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rehau PVC edgebanding 301021-047 is a PVC edge banding from Rehau, Inc. that finishes exposed panel edges so they visually match the Kensington MPL surface. The WA 10776 Kensington MPL 15/16X3MMX300FLX description identifies it as an edge banding product sized for typical panel work, giving you a consistent trim solution around cabinet and furniture components. The 15/16 width pairs with common 3/4 panels while leaving workable overhang, and the 3mm thickness builds a substantial edge profile that stands out against flat laminate faces. As a PVC edgebanding, it installs as a flexible strip along straight or gently curved runs, letting you wrap raw substrate edges where a matching Kensington MPL look is required. The dedicated manufacturer part number 301021-047 helps you reorder the exact same banding any time matching repairs or additions are needed on the same job.
The Kensington MPL 15/16X3MMX300FLX sizing gives installers a predictable strip to run along cabinet and furniture edges, so layout revolves around a known 15/16 width and 3mm build. That width positions neatly over common 3/4 substrates with usable excess at both faces, allowing trimming tools to cut back to a clean line without chasing short spots. The 3mm thickness produces a robust edge against flat faces, guiding setup of trimmers, flush bits, or edge-scraping tools to a repeatable depth. Because this product is specifically categorized as edge banding, it drops directly into workflows built around applying PVC strips to panel edges where the Kensington MPL appearance is required.
This Rehau PVC edgebanding, identified by manufacturer part number 301021-047 and SAP description WA 10776 Kensington MPL 15/16X3MMX300FLX, fits jobs that call for a Kensington MPL edge detail on panel-based components. The 15/16 width works well across cabinet sides, shelves, and fronts built from standard sheet goods because it spans the panel thickness with enough edge for trimming on both faces. As a 3mm-thick PVC edge banding, it suits exposed situations such as door perimeters and vertical cabinet stiles where a heavier edge is part of the design intent. The edge banding category and Kensington MPL reference position it for use wherever a coordinated Kensington MPL program is installed across furniture, casework, or similar woodworking assemblies.
The WA 10776 Kensington MPL 15/16X3MMX300FLX description spells out dimensions that help you standardize equipment setup across runs of the same Rehau PVC edgebanding. Knowing the strip is 15/16 wide lets you tune trimmers and guides so the final edge lands flush with both faces of typical panel thicknesses without repeated trial cuts. The 3mm thickness guides cutter projection on flush-trim bits and scraping tools, so operators can work quickly without over-cutting the decorative surface. Because the product class is Edge Banding and the brand is Rehau, Inc., you can match it to other Rehau Kensington MPL elements by part number, keeping door, drawer, and carcass edges visually tied together across an installation. The unique identifier 301021-047 also supports organized storage and picking, reducing selection errors when multiple PVC edge banding colors or programs are stocked in the same shop.
Rehau PVC edgebanding 301021-047 is an edge banding product, so it is designed specifically to cover and finish exposed panel edges using a Kensington MPL visual match.
The 15/16 width extends past typical 3/4 panel thickness, giving extra material for trimming while still fully covering the substrate edge after processing.
The 3mm thickness creates a heavier edge profile, which can give doors and panels a more substantial framed look compared with thin edge treatments.
This Kensington MPL edge banding is identified by manufacturer part number 301021-047 and SAP description WA 10776 Kensington MPL 15/16X3MMX300FLX for repeat selection.
This PVC edge banding is manufactured by Rehau, Inc., which helps align it with other Rehau edge banding elements on Kensington MPL projects.
The Edge Banding product class confirms it is intended only for edge treatment, so planners can assign it to finishing exposed panel edges in takeoffs.
This Rehau PVC edgebanding 301021-047 from Wurth Baer Supply pairs a Kensington MPL-specific description with 15/16X3MMX300FLX sizing, giving shops a clearly identified strip for edge finishing on matching panel work. Using the manufacturer part number 301021-047 across ordering, storage, and production keeps the same Kensington MPL edge available for original builds and later expansions. For projects built around a Kensington MPL program, this dedicated PVC edge banding supports repeatable, consistent edge treatment on cabinets and furniture components.
Sold In: 1 Roll