Amerock Balata oil rubbed bronze knob identifies this piece as part of Amerock Corporation's Balata collection of decorative cabinet hardware, so it fits project plans that call out this specific series by name. The 1-1/8 inch, or 29 mm, diameter knob gives you a compact round grip point that works well across multiple door and drawer sizes without dominating the face of the panel. Subtle knurling texture on the knob surface provides extra finger traction, which helps with consistent opening and closing when hands are dusty or slick. The simple, geometric form of the Balata knob keeps sightlines clean, which supports layouts where hardware should coordinate with a range of cabinet styles. The rich, burnished oil-rubbed bronze finish with visible copper brush marks adds depth on painted or stained cabinetry, so the knob reads as a deliberate design element rather than an afterthought.
The Balata 1-1/8 inch diameter knob creates a centered pull point, which simplifies layout when you are drilling door and drawer fronts on a line borer or jig. The round footprint suits face-frame and frameless cabinet construction, because the modest diameter stays clear of door edges and adjacent fronts when doors swing or drawers extend. The cylindrical form of this Amerock Balata cabinet knob works with common through-bore mounting methods, so it integrates smoothly into typical shop drilling patterns. The oil-rubbed bronze finish is designed as a decorative surface, which means its dark tone helps visually mask minor fingerprints and everyday handling on busy cabinet runs.
The Balata 1-1/8 inch (29 mm) diameter knob works well anywhere you need a compact, repeatable grip point on cabinet doors or drawers, because its round footprint is easy to position off edges and rails. On long cabinet runs, the consistent Amerock Balata cabinet knob profile lets you maintain a unified look from base cabinets to uppers without changing drilling setups. The subtle knurling texture around the knob body supports use in high-touch zones such as kitchen work centers or shop storage, because the fine ridges give fingers something to bite into during frequent pulls. The rich oil-rubbed bronze finish with copper brush marks pairs especially well with stained woods and darker paints, helping the hardware tie into existing bronze hinges or other bronze decorative hardware in the space. As part of Amerock decorative cabinet hardware, this knob fits design schemes that call for coordinated knobs across multiple rooms or cabinet banks.
The defined 1-1/8 inch diameter lets you standardize drilling jigs, because every Balata knob in this model occupies the same compact circle on the face, which reduces layout variation between doors and drawers. The simple geometric form of the Amerock Balata oil rubbed bronze knob presents a clean vertical silhouette, which makes it easier to read level and plumb alignment by eye during installation. The oil-rubbed bronze finish with visible copper brush marks adds depth without high reflectivity, which can help hardware lines stay visually straight under varied lighting along a long run of cabinets. The consistent knurling pattern around the knob gives an immediate tactile cue, which helps users locate and pull doors reliably, even when approaching from the side. By tying every detail to the BP37632ORB part number, this knob keeps replacements straightforward, because a single reference maintains the same size, finish, and Balata styling wherever it is used.
The Amerock Balata cabinet knob in model BP37632ORB has a 1-1/8 inch, or 29 mm, diameter, which provides a compact but comfortable grip point on most cabinet doors and drawers.
The Balata knob's oil-rubbed bronze finish shows rich dark tones with copper brush marks, which adds depth and a burnished appearance on painted or stained cabinet surfaces.
The Amerock Balata knob features subtle knurling texture, giving fingers extra traction during pulls, which helps with consistent door and drawer operation in everyday use.
The BP37632ORB Balata knob is manufactured by Amerock Corporation, a brand focused on decorative and functional cabinet hardware and related home solutions.
The Balata knob uses simple, geometric forms, so the same 1-1/8 inch round profile coordinates cleanly across kitchen, bath, or storage cabinetry without changing visual direction.
The BP37632ORB part number identifies this Balata series knob as a 1-1/8 inch diameter piece in the oil-rubbed bronze finish, helping match size and finish during planning or replacement.
The Amerock Balata oil rubbed bronze knob in 1-1/8 inch diameter gives you a defined size, finish, and texture under a single BP37632ORB part number, which simplifies specifying hardware for coordinated cabinet runs. The combination of subtle knurling, simple geometric form, and burnished oil-rubbed bronze finish supports both functional grip and a consistent visual line on installed doors and drawers. For projects that standardize on Amerock decorative cabinet hardware, choosing this Balata knob lets you repeat the same look and feel from one bank of cabinets to the next without revisiting hardware decisions.