Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Ladera backplate 128mm is a decorative backplate from the Amerock Ladera Series designed for cabinet hardware layouts that match a 128mm center-to-center pull. The 5-1/16 inch center-to-center dimension gives a clear reference when planning drill locations across doors and drawer fronts. This Amerock Corporation backplate is part of the Backplates, Amerock product class, so it is suited to finishing off pull installations where a defined footprint is wanted behind the pull. The polished nickel finish provides a bright metallic surface that visually ties into polished nickel pulls and hinges on the same run of cabinetry. Using a dedicated Ladera Series backplate helps maintain a consistent style language wherever that Ladera look is specified. The BP37763PN manufacturer part number identifies this exact polished nickel Ladera backplate when ordering or matching to a current job schedule.
This Amerock Ladera Series backplate is built around a 128mm center-to-center dimension, so it aligns with pulls drilled on that spacing without forcing new hole locations. The 5-1/16 inch center-to-center description expresses the same spacing for teams working primarily in inches, which helps maintain accuracy when laying out fronts from mixed-dimension plans. Because it is a backplate within the decorative hardware and moldings category, it sits between the cabinet surface and the pull, defining a clean visual footprint around the handle area. The polished nickel finish allows this piece to visually integrate with other polished nickel elements on the project, supporting a coordinated run of hardware from door to door.
This Ladera Series backplate fits cabinet layouts that already specify 128mm or 5-1/16 inch center-to-center pulls, so it can be applied wherever that spacing runs across a kitchen, bath, or casework line. When a design calls for Amerock Ladera pulls, this backplate gives a matching Ladera-branded component behind the pull, keeping the style consistent from one opening to the next. The decorative hardware and moldings classification means it is suited to visible cabinet faces where the backplate footprint becomes part of the finished look. Because the finish is polished nickel, it aligns with polished nickel pulls, hinges, and other fittings that repeat through the space, giving the hardware run a single, unified metallic tone. On projects documented by part number, the BP37763PN code anchors this backplate to drawings and cut sheets so that the specified polished nickel Ladera piece shows up on the correct cabinets.
The explicit 128mm center-to-center measurement on this Amerock backplate provides a fixed reference for boring patterns, which helps crews repeat the same spacing across multiple doors without recalculating. The 5-1/16 inch center-to-center label communicates the same spacing to installers working in imperial units, reducing the chance of layout errors when reading job notes that switch between metric and inch references. Tying this part to the Amerock Ladera Series tells designers and installers that the style aligns with other Ladera components, which matters when swapping hardware on an existing Ladera installation and wanting the backplate to match. The polished nickel finish description signals the visual character of the backplate, letting teams coordinate this BP37763PN model with other polished nickel hardware already present in the room. Using the full manufacturer part number, BP37763PN, keeps ordering and replacement traceable over time so that future pulls on the same cabinets can rely on the same backplate specification.
The Amerock Ladera Series backplate is specified at 128mm, also described as 5-1/16 inch center-to-center, so it matches pulls drilled on that spacing.
The polished nickel finish on this Amerock backplate provides a bright metallic look that visually coordinates with other polished nickel cabinet hardware on the project.
This Amerock Ladera backplate sits between the cabinet surface and the pull, defining a decorative footprint around the handle area at 128mm center-to-center.
The backplate uses manufacturer part number BP37763PN, which identifies the Ladera Series polished nickel 128mm center-to-center model for ordering and documentation.
This backplate is part of the Amerock Ladera Series and the Backplates, Amerock product class, so it aligns with Ladera-designed cabinet hardware.
The Amerock Ladera Series backplate is listed under decorative hardware and moldings, making it suited for visible cabinet applications.
The Amerock Ladera Series backplate in polished nickel pairs with 128mm or 5-1/16 inch center-to-center pulls to bring a defined decorative footprint to cabinet fronts. Its polished nickel finish coordinates with matching hardware, while the BP37763PN part number keeps your Wurth Baer Supply orders consistent across projects. When a job calls for the Ladera look at a 128mm layout, this Amerock backplate gives a clearly specified component that supports both initial installation and later replacement on the same cabinets.