Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Ladera backplate 6-5/16 in refers to a decorative backplate from the Amerock Ladera Series designed for use with cabinet hardware. The backplate sits behind a pull or similar decorative hardware, giving the installation a defined visual base. The 6-5/16 inch measurement identifies the center-to-center layout the backplate is sized to coordinate with, helping you line it up with matching pulls on doors or drawers. The polished chrome finish provides a bright, reflective surface that visually ties in with polished chrome pulls and hinges. As part of the Amerock Ladera Series, this backplate keeps styling consistent across multiple cabinet openings, supporting a unified look on a job. The Amerock branding and named series also support repeatable selection when matching existing Ladera hardware in a space.
The center-to-center dimension of 6-5/16 inches ties directly to how this Amerock backplate lines up under a cabinet pull, giving you a clear spacing reference during layout. The 160mm center-to-center description provides the same spacing in metric terms, useful when working from metric shop drawings or European-style layouts. Because the backplate is part of the Amerock Ladera Series, it is intended to coordinate with Ladera hardware that follows the same layout standards, supporting consistent alignment across multiple fronts. The polished chrome finish also helps the installed backplate visually align with polished chrome pulls, so finished runs of cabinets present as a continuous set.
This Amerock Ladera Series backplate is categorized under decorative hardware and moldings, so its role is to sit between the cabinet surface and the selected hardware. The 6-5/16 inch center-to-center sizing positions it for use wherever the pull layout follows that spacing, such as typical cabinet doors or medium-width drawers using matching pulls. The 160mm center-to-center description aligns with layouts that call out metric dimensions, supporting use in cabinetry that references millimeter spacing. Because it belongs to the Amerock Ladera Series, the styling and proportions are intended to work alongside other Ladera components, helping you carry the same design language across all casework in a room.
The polished chrome finish gives this backplate a reflective appearance that works in projects where other polished chrome hardware is specified. This material look lets the backplate visually disappear behind a polished chrome pull while still defining a neat border between the hardware and the cabinet face. The Amerock branding and BP3776426 part number also support future service work by tying the installed part back to a specific catalog reference, helping you match existing Ladera installations when cabinets are added or modified later.
The defined 6-5/16 inch, or 160mm, center-to-center spacing on this Amerock Ladera backplate means hole locations for the pull and backplate share the same reference. That shared spacing helps reduce layout discrepancies when repeating the same pull pattern along a run of cabinets. The product class listing as an Amerock backplate identifies it as a trim component with a fixed role in the hardware stack, so installers can plan the cabinet face, backplate, and pull as a single assembly dimensionally.
The Ladera Series naming also makes it easier to specify the same backplate whenever a Ladera pull on the same center-to-center spacing is selected, promoting consistent visual results across multiple areas of a project. The polished chrome finish further supports repeatable outcomes by matching other polished chrome fittings, so the backplate does not interrupt the metal finish sequence from hinge to knob or pull. When the same BP3776426 part is used throughout, cabinet runs maintain the same decorative footprint behind each pull, helping finished work look planned and uniform from panel to panel.
The Amerock BP3776426 is a decorative backplate from the Amerock Ladera Series, so it is used as a trim piece behind cabinet hardware to define the visual footprint of the pull.
The 6-5/16 inch center-to-center measurement indicates the spacing this backplate is sized to align under, guiding how it pairs with pulls drilled on the same spacing.
The 160mm center-to-center sizing provides a metric reference for the same spacing, helping align this backplate with cabinet layouts or drawings dimensioned in millimeters.
The polished chrome finish gives the backplate a bright, reflective look that visually coordinates with polished chrome pulls and hinges, helping cabinet hardware read as one continuous set.
The Amerock Ladera Series designation ties this backplate to a specific decorative hardware family, supporting consistent style and proportions across all Ladera pieces on a project.
The BP3776426 part number uniquely identifies this Amerock Ladera backplate, making it straightforward to reorder or match existing installations on future cabinet work.
The Amerock Ladera backplate 6-5/16 in polished chrome combines a defined 6-5/16 inch, or 160mm, center-to-center layout with a polished chrome finish, so it fits projects calling for that spacing and finish. As an Amerock Ladera Series backplate, it aligns with Ladera hardware choices across a run of cabinets. When a job requires this specific combination of series, finish, and center-to-center spacing, selecting the BP3776426 part keeps the decorative hardware footprint consistent from cabinet to cabinet.