Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Medora backplate 320mm identifies this piece as a Medora Series backplate from Amerock Corporation with a 320mm center-to-center layout, so it lines up with pulls drilled to that spread on doors or drawers. The product name specifies a 12-5/8 inch center-to-center length, giving you a clear span to cover existing bore marks along that run on cabinetry. As a backplate in the Amerock Medora Series, it works in the decorative hardware and moldings category, so it visually finishes the base of a pull while also masking the footprint of old hardware on wood or laminate faces. The polished nickel finish called out in the web description and SAP description provides a bright metallic surface that pairs with polished nickel pulls, keeping finish match consistent across a run of cabinets.
The stated 320mm center-to-center dimension gives a fixed distance between mounting points, so layout on cabinet doors or drawers can be planned around that exact span in a drilling template. The 12-5/8 inch center-to-center callout mirrors the same dimension in imperial terms, so installers working from inch-based shop drawings can translate directly without conversion on site. Being defined as a backplate within Amerock decorative hardware means this part sits between the cabinet face and the pull, so it adds a stable bearing surface that helps distribute pull load across more of the door or drawer face. The polished nickel finish on this Medora Series backplate visually aligns with polished nickel hardware on the same line, keeping alignment and finish consistent from piece to piece.
The Amerock Medora Series, Backplate 12-5/8 inch CC Polished Nickel is defined as decorative hardware for use with other cabinet hardware elements, so it fits door and drawer applications where a pull is already specified. The 320mm center-to-center span places this Medora backplate in projects using that wide pull spacing, so it suits longer cabinet fronts or wider drawer faces where extended pulls are planned. Its category as a backplate under decorative hardware and moldings positions it on kitchens, baths, or built-in cabinetry where a finished pull base is part of the design intent. With the polished nickel finish expressed in both the SAP and web descriptions, this Medora backplate fits jobs that standardize on polished nickel hardware, so each elevation presents a cohesive metallic tone across multiple cabinet runs.
The Amerock Corporation branding behind the Medora Series backplate ties it to a defined manufacturer part number BP37788PN, so specifying that exact code keeps pull backplates identical across initial and later project phases. The dual notation of 320mm and 12-5/8 inch center-to-center gives a precise drill span in both metric and imperial references, reducing dimensional translation steps when layouts move between design tools and the shop floor. As a member of the backplates, Amerock class, this Medora piece is intended to sit under a pull, so it can cover previous pull marks along that centerline and present a clean face on retrofit cabinetry. The polished nickel callout in the SAP description MEDORA BACKPLATE 320MM CC POLISHED NKL and web description confirms one consistent finish reference, so ordering and on-site identification both align around the same color description for repeatable results.
The 320mm center-to-center size states the distance between the pull mounting points, so drilling or existing holes on cabinet doors or drawers need to follow that span for proper alignment.
The 12-5/8 inch center-to-center dimension matches the 320mm span in imperial units, so shop drawings and installation layouts based in inches can apply that value directly during drilling.
The Amerock Medora Series backplate is specified as polished nickel, so it visually coordinates with polished nickel pulls and other hardware in the same project line.
This backplate is identified by manufacturer part number BP37788PN, so reordering that code keeps later phases using the same Medora polished nickel backplate.
This product is categorized as a backplate in decorative hardware and moldings, so it sits behind a pull to expand the pull footprint and present a finished base on cabinet faces.
This polished nickel backplate belongs to the Amerock Medora Series, so it aligns with other Medora hardware pieces for coordinated cabinet installations.
The Amerock Medora Series, Backplate 12-5/8 inch CC Polished Nickel combines a 320mm center-to-center span with a polished nickel finish, so it supports wide-pull cabinet layouts using that drill spread and finish standard. With its BP37788PN identifier and placement in Amerock decorative hardware and moldings, this Medora backplate offers a defined role under matching pulls on doors and drawers. For projects built around polished nickel cabinet hardware at a 320mm or 12-5/8 inch center-to-center run, this Amerock Medora backplate provides a consistent, clearly specified component to fit into the overall hardware plan.