Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Thoreau backplate 6-5/16 CC satin nickel describes a decorative backplate from the Amerock Thoreau Series that installs behind a pull, so it visually frames the pull and defines the contact area on the front of the cabinet. The satin nickel finish gives the backplate a muted metallic look, which supports contemporary and transitional cabinet styles where a softer sheen is preferred over bright metal. The 6-5/16 inch center-to-center sizing means the pull holes on the backplate are spaced to work with pulls drilled on that same center-to-center layout, keeping the pull and backplate aligned during installation. The same dimension is also described as 160mm CC, so it matches layouts referenced in metric shop drawings that specify a 160mm center-to-center pull position. The Amerock branding identifies the part as BP37604G10, which ties it directly to the Thoreau Series decorative hardware family.
The 6-5/16 inch center-to-center sizing on the Amerock Thoreau Series backplate means its pull openings are aligned for use where cabinet fronts are drilled at that same 6-5/16 inch spacing, so the backplate seats around the pull posts without shifting. Describing the spacing as 160mm CC provides the same information in metric terms, which supports project documentation that calls out 160mm hardware patterns. Because this part is classified as a backplate in the decorative hardware category, it is intended to sit between the cabinet face and the pull, so its outline defines the visual footprint of the hardware on the door or drawer front during installation.
The Amerock Thoreau Series, Backplate 6-5/16 inch CC satin nickel is identified as decorative hardware in the backplates category, so it is applied directly to the front surface of cabinet doors or drawer faces as part of a pull assembly. The 6-5/16 inch or 160mm center-to-center dimension places this backplate specifically in layouts that use pulls drilled on that spacing, so it ties into medium-length pull runs often used on base cabinets and wider drawers. Because the finish is satin nickel, the backplate visually supports installations where other satin nickel hardware is present, so it can be integrated into Amerock Thoreau Series projects that already rely on that finish family. The Amerock product class designation as Backplates, Amerock positions this piece as a decorative plate rather than a pull, so it works in combination with a separate pull that shares the same center-to-center measurement.
The fact that the SAP description and web description both call out 160mm CC and 6-5/16 inch CC on the Amerock Thoreau Series backplate indicates that the part is intended to align with either imperial or metric planning on the same job, so it can bridge drawings that reference both systems. The precise center-to-center definition on this backplate supports repeatable drilling and layout, because installers can match their jig or boring pattern directly to the 6-5/16 inch or 160mm spacing without additional conversion. The satin nickel finish specified in the descriptions defines the surface appearance, so designers can specify this backplate alongside satin nickel pulls, hinges, and other Amerock decorative hardware to keep finishes consistent from one cabinet run to the next. The BP37604G10 manufacturer part number further anchors the detail in project documents, so the same Amerock Thoreau backplate model can be identified across estimating, ordering, and field installation notes.
The Amerock Thoreau backplate is described as 6-5/16 inch center-to-center, also noted as 160mm CC, so it supports pull layouts drilled to that same hole spacing on cabinet fronts.
The satin nickel finish on the Amerock Thoreau backplate provides a muted metallic look, so it visually coordinates with other satin nickel cabinet hardware in the same installation.
The product is categorized as Decorative Hardware & Moldings in the backplates class, so it functions as a decorative plate behind a cabinet pull.
BP37604G10 is the Amerock manufacturer part number for this Thoreau Series backplate, so it uniquely identifies this satin nickel, 160mm CC model for ordering and documentation.
The 160mm CC specification on the Amerock Thoreau backplate matches metric drilling layouts, so it integrates with cabinet plans that call out 160mm pull spacing.
The Amerock Thoreau Series backplate is installed between the cabinet face and a pull set on 6-5/16 inch or 160mm centers, so it frames the pull and defines the contact area.
The Amerock Thoreau Series, Backplate 6-5/16 inch CC satin nickel provides a defined 6-5/16 inch or 160mm center-to-center layout in a satin nickel finish, so it fits cabinet runs planned around that spacing and finish. Choosing BP37604G10 from Amerock Corporation ties the backplate directly into the Thoreau Series decorative hardware family, so it can be specified wherever a coordinated Amerock satin nickel backplate is needed behind a matching pull.