Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Karran Fusion 30 inch undermount sink describes a 30 inch wide single bowl kitchen sink designed to mount under the countertop, so the sink edge sits below the surface and leaves a clean transition that helps with wiping debris straight into the bowl. Crafted from premium grade 16-gauge T304 stainless steel, the sink uses a thicker stainless sheet that provides a solid feel and resists deformation when heavy pots or pans are dropped into the bowl during normal kitchen work. As part of Karran stainless steel sinks, this model sits in the stainless steel sinks product class, which orients it toward kitchen and similar wet-area installations where corrosion resistance and cleanability matter. The sink weight of approximately 23 lbs indicates a substantial stainless construction that supports stable undermount installation and long-term use when properly supported in a cabinet.
The Karran Fusion 30 inch undermount sink is designed as an undermount kitchen sink, so the mounting method relies on fastening the stainless bowl to the underside of the countertop, which leaves the deck clear and simplifies sweeping debris from the surface into the basin. A minimum cabinet size of 33 inches provides the width requirement for the base cabinet, which guides cabinet selection and layout so the 30 inch wide bowl can fit between cabinet sides with room for mounting hardware and countertop structure. The 3-1/2 inch drain opening size sets the connection point in the base and aligns with most garbage disposals that use that opening, streamlining drain and disposal planning during rough-in and final hookup.
The product name Karran Fusion 30 inch stainless steel undermount kitchen sink single bowl defines it as a single bowl sink intended for kitchen use, so the entire footprint becomes one continuous workspace that suits washing large cookware or prep items without center dividers. Being part of Karran stainless steel sinks, the bowl takes advantage of stainless steel surfaces that tolerate frequent contact with water, food residues, and cleaning agents commonly used in kitchen environments. Crafted from premium grade 16-gauge T304 stainless steel, the sink leverages a specific grade of stainless that is widely used in wet and food-related applications, which supports long-term resistance to staining and rust in a typical residential or light commercial kitchen. The reversible offset drain keeps your workspace clutter-free by locating the drain toward one side, so dishes or racks can sit away from the main work center while water still flows freely to the outlet. Because the drain can be reversed, installers can position the offset to better suit the cabinet interior layout or nearby appliances while still maintaining an open central working zone in the bowl.
The SAP description Fusion workstation kit, UMT-OD SGL 30,16G identifies the sink as a 30 inch single bowl undermount design, which gives a predictable outside width for planning cabinet and countertop cutouts in new or retrofit projects. Minimum cabinet size 33 inches defines the base cabinet span needed beneath the countertop, so cabinet runs can be designed around that dimension to avoid interference between the bowl walls and cabinet sides. Drain opening size 3-1/2 inches, compatible with most garbage disposals, means the sink outlet diameter aligns with standard disposal and basket strainer bodies, which simplifies tying the bowl into existing or planned waste lines. Crafted from premium grade 16-gauge T304 stainless steel, the material and gauge selection result in a sink shell that resists flexing when undermounted, which supports consistent reveal lines at the countertop edge. The approximate weight of 23 lbs reflects the heavier 16-gauge construction, and that mass helps the sink sit solidly in its undermount position so faucet use, dish loading, and garbage disposal operation do not easily transmit vibration through a thin shell.
The Karran Fusion 30 inch undermount sink is a single bowl stainless steel undermount kitchen sink, so it mounts below the countertop and provides one full-size basin for washing and prep.
The Karran stainless steel kitchen sink is crafted from premium grade 16-gauge T304 stainless steel, which gives the bowl a thicker shell for a solid feel and resistance to everyday impact loads.
The Fusion workstation undermount sink has a minimum cabinet size of 33 inches, so it is suited to base cabinets with at least that interior width under the countertop span.
The single bowl stainless steel sink has a 3-1/2 inch drain opening size, which matches the standard opening used by most garbage disposals for straightforward waste connection.
The reversible offset drain keeps your workspace clutter-free by shifting the drain to one side, allowing more open space in the central bowl area for washing and prep tasks.
The approximate weight of 23 lbs indicates a substantial 16-gauge stainless steel construction, which supports sink stability and a solid feel when undermounted in a kitchen cabinet.
The Karran Fusion 30 inch undermount sink combines a 30 inch single bowl layout with a reversible offset drain and a 3-1/2 inch drain opening size, so it aligns with typical kitchen plumbing and disposal setups. Crafted from premium grade 16-gauge T304 stainless steel and weighing approximately 23 lbs, it offers a substantial stainless shell for undermount applications in a minimum 33 inch cabinet. For projects calling for a stainless steel undermount kitchen sink with a single bowl and offset drain design, this Karran model provides the key dimensions and material details needed for confident specification and layout.
Sold In: 1 Kit