Rehau PVC edgebanding 301021-033 is a PVC edge banding designed to finish raw panel edges, so cabinet and fixture projects present a clean, professional line where the substrate would otherwise show. The 15/16 inch width stated in the SAP description gives coverage over standard 3/4 inch panels with allowance for slight overhang, which supports flush trimming without exposing the core material. The 3mm thickness described in the product data provides a heavier edge profile than thin tape styles, which helps create a more substantial edge appearance on doors, drawer fronts, or work surfaces. Being described as FLEX in the SAP text indicates a flexible construction, which allows the strip to follow typical cabinet edge runs and gentle transitions in casework layouts. Identification by manufacturer part number 301021-033 ties this edgebanding to Rehau, Inc., which helps shops match this specific item across drawings, purchase orders, and future reorders during ongoing work.
The 15/16X3MM dimension in the SAP description sets both width and thickness before trimming, which allows planners to align machine settings and tooling for this specific cross-section during edgebanding runs. The 300FT detail in the SAP description identifies a continuous 300 foot length, which supports longer production runs or multiple pieces from a single roll with fewer changeovers during shop work. The FLEX wording in the SAP description describes a flexible format, which allows the strip to wrap along typical cabinet edges and straight carcass panels without cracking through standard handling and processing. Identifying this product as PVC edgebanding defines it as suited to edge-finishing operations where a synthetic band is preferred over other edge treatments during fabrication.
The product class listed as edge banding shows that Rehau PVC edgebanding, 301021-033, is intended for covering exposed edges on boards and similar substrates in woodworking and cabinet production. The 15/16 inch width noted in the SAP description fits work built around 3/4 inch sheet stock, which matches many cabinet carcasses, shelves, and fronts used in shop-built and casework projects. The 3mm thickness specified in the SAP description provides a robust edge suitable for high-contact areas, which aligns with uses such as cabinet doors, drawer fronts, and frequently handled panels. The PVC designation in the product name points to a plastic edging solution, which works well where a machinable, uniform edge is needed across many parts in a run. Reference to CP30007 and manufacturer part number 301021-033 ties this banding to a defined configuration, which matters when matching existing installations or maintaining visual consistency within a room of coordinated components.
The 15/16X3MM FLEX CP30007 LAC 300FT wording in the SAP description provides the key working details in a single line, which helps estimators and machine operators quickly understand width, thickness, flexibility, and run length for planning purposes. The 3mm thickness value tells operators how much material stands proud of the core before trimming, which informs cutter depth and feed setups so trimmed edges stay smooth and flush along the full run. The 15/16 inch width detail allows allowances for front and back overhang on a 3/4 inch panel, which means trimming passes can remove small alignment variations while still fully covering the substrate. The FLEX note in the SAP description signals that the strip is designed to bend as an edgebanding, which supports normal handling through application and trimming equipment in a woodworking shop. Identification as Rehau PVC edgebanding, 301021-033, ties these details to a repeatable product, which supports consistent performance from job to job when the same material is specified.
Rehau PVC edgebanding 301021-033 has a 15/16 inch width from the SAP description, which covers standard 3/4 inch panel edges while leaving extra material for trimming flush on both faces.
Rehau PVC edgebanding, 301021-033, uses a 3mm thickness as stated in the SAP description, which creates a heavier edge profile suited to doors, drawer fronts, and high-contact cabinet parts.
The FLEX wording in the SAP description for 301021-033 indicates a flexible PVC edge banding, which lets the material follow typical straight panel edges during standard edgebanding operations.
Rehau PVC edgebanding 301021-033 is listed in the SAP description as 300FT, providing a 300 foot length that supports extended cabinet or fixture runs from a single roll.
The CP30007 reference in the SAP description identifies a specific configuration of this PVC edgebanding, which helps maintain consistent appearance across related cabinet components.
This PVC edge banding is identified as Rehau PVC edgebanding, 301021-033, with manufacturer part number 301021-033, which simplifies matching on drawings and future orders.
Rehau PVC edgebanding 301021-033 combines a 15/16 inch width, 3mm thickness, FLEX format, and 300FT length, as detailed in the SAP description, so edge dimensions and run length are clearly defined for project planning. The edge banding product class and PVC material identity confirm its role as a dedicated edging solution for covering exposed panel cores in woodworking and cabinet production. Using the manufacturer part number 301021-033 and the CP30007 reference keeps this specific configuration easy to call out on cut lists and purchase documents, which supports consistent results from the first panel through repeat jobs.
Sold In: 1 Roll