Rehau PVC edgebanding 301021-047 Kensington MPL

Rehau PVC Edgebanding 301021-047 For Clean Edges

Rehau PVC edgebanding 301021-047 is a PVC edge banding from Rehau, Inc. that finishes exposed panel edges so they visually match the Kensington MPL surface. The WA 10776 Kensington MPL 15/16X3MMX300FLX description identifies it as an edge banding product sized for typical panel work, giving you a consistent trim solution around cabinet and furniture components. The 15/16 width pairs with common 3/4 panels while leaving workable overhang, and the 3mm thickness builds a substantial edge profile that stands out against flat laminate faces. As a PVC edgebanding, it installs as a flexible strip along straight or gently curved runs, letting you wrap raw substrate edges where a matching Kensington MPL look is required. The dedicated manufacturer part number 301021-047 helps you reorder the exact same banding any time matching repairs or additions are needed on the same job.

Key Rehau Edgebanding Details That Support Work

• Rehau, Inc. branding ties this PVC edge banding to a recognized edge banding manufacturer, which supports consistent color and texture matching when repeating Kensington MPL across multiple components on a project.
• The WA 10776 Kensington MPL reference links this strip to a Kensington MPL visual program, helping installers keep edge appearance aligned with the intended surface design across cabinet doors, drawer fronts, and casework sides.
• The 15/16 width in the WA 10776 Kensington MPL 15/16X3MMX300FLX description gives modest overhang beyond standard 3/4 panels, leaving trimming room for a tight final edge without exposing the core.
• The 3mm thickness specified in 15/16X3MMX300FLX creates a noticeably thicker edge profile, which can visually frame doors and panels and provide a solid look at high-visibility fronts.
• The edge banding category classification confirms this product is meant for edge treatment rather than surface lamination, letting you assign it specifically to finishing raw panel edges in planning and takeoff.

Edgebanding Sizing That Helps Day-To-Day Installation

The Kensington MPL 15/16X3MMX300FLX sizing gives installers a predictable strip to run along cabinet and furniture edges, so layout revolves around a known 15/16 width and 3mm build. That width positions neatly over common 3/4 substrates with usable excess at both faces, allowing trimming tools to cut back to a clean line without chasing short spots. The 3mm thickness produces a robust edge against flat faces, guiding setup of trimmers, flush bits, or edge-scraping tools to a repeatable depth. Because this product is specifically categorized as edge banding, it drops directly into workflows built around applying PVC strips to panel edges where the Kensington MPL appearance is required.

Using Rehau Kensington MPL Edgebanding In Projects

Where This Rehau PVC Edgebanding 301021-047 Fits

This Rehau PVC edgebanding, identified by manufacturer part number 301021-047 and SAP description WA 10776 Kensington MPL 15/16X3MMX300FLX, fits jobs that call for a Kensington MPL edge detail on panel-based components. The 15/16 width works well across cabinet sides, shelves, and fronts built from standard sheet goods because it spans the panel thickness with enough edge for trimming on both faces. As a 3mm-thick PVC edge banding, it suits exposed situations such as door perimeters and vertical cabinet stiles where a heavier edge is part of the design intent. The edge banding category and Kensington MPL reference position it for use wherever a coordinated Kensington MPL program is installed across furniture, casework, or similar woodworking assemblies.

Why These WA 10776 Kensington MPL Details Matter

The WA 10776 Kensington MPL 15/16X3MMX300FLX description spells out dimensions that help you standardize equipment setup across runs of the same Rehau PVC edgebanding. Knowing the strip is 15/16 wide lets you tune trimmers and guides so the final edge lands flush with both faces of typical panel thicknesses without repeated trial cuts. The 3mm thickness guides cutter projection on flush-trim bits and scraping tools, so operators can work quickly without over-cutting the decorative surface. Because the product class is Edge Banding and the brand is Rehau, Inc., you can match it to other Rehau Kensington MPL elements by part number, keeping door, drawer, and carcass edges visually tied together across an installation. The unique identifier 301021-047 also supports organized storage and picking, reducing selection errors when multiple PVC edge banding colors or programs are stocked in the same shop.

Common Questions About Rehau PVC Edgebanding 301021-047

Select Rehau PVC Edgebanding 301021-047 For Kensington MPL

This Rehau PVC edgebanding 301021-047 from Wurth Baer Supply pairs a Kensington MPL-specific description with 15/16X3MMX300FLX sizing, giving shops a clearly identified strip for edge finishing on matching panel work. Using the manufacturer part number 301021-047 across ordering, storage, and production keeps the same Kensington MPL edge available for original builds and later expansions. For projects built around a Kensington MPL program, this dedicated PVC edge banding supports repeatable, consistent edge treatment on cabinets and furniture components.