Rehau PVC edgebanding 301021-139 15/16 x 3mm

Rehau PVC Edgebanding 301021-139 For Clean Edges

Rehau PVC edgebanding 301021-139 is a PVC edge banding from Rehau, Inc. that covers and protects exposed substrate edges, so cabinet and millwork projects finish with a uniform, professional-looking edge instead of an open core. This edge banding is 15/16 inch wide, giving coverage that comfortably spans standard panel thickness while allowing a controlled trim margin along both faces. The 3mm thickness provides a substantial edge profile that helps visually match thicker fronts and offers more material for precise edge trimming without cutting through. The product is identified as FLEX CP40577 LAC, indicating a flexible PVC construction that conforms around typical straight runs and standard contour work in cabinetry. Supplied as a 300 foot coil, it supports longer runs or multiple cabinet jobs from a single part number, which streamlines material planning and reduces changeovers between rolls on repetitive work.

Key Edge Banding Details That Support Workflow

• The 15/16 inch width spans common panel thickness with trim allowance, which helps installers align the band quickly while leaving enough edge to flush-trim cleanly along both faces.
• The 3mm thickness creates a pronounced PVC edge, giving more material for fine trimming passes and helping match thicker fronts or doors where a slim tape edge would look undersized.
• The FLEX CP40577 designation points to a flexible PVC formulation, which allows the banding to follow straight cabinet sides and typical gentle curves without fighting the material during application.
• The 300 foot coil length supports longer production runs under one part number, reducing roll changes on edge banders and helping keep color and material consistent across a full project.
• The Rehau, Inc. brand and manufacturer part number 301021-139 provide a precise reference, helping shops reorder the same edgebanding when matching existing jobs or maintaining finish standards.

Dimensions And Format For Straightforward Application

This Rehau PVC edge banding is specified at 15/16 inch by 3mm, so installers work with a band that overhangs typical panel thickness just enough for trimming while delivering a 3mm thick edge reveal. That size relationship supports standard edge banding workflows on cabinet parts, shelving, or millwork components where a durable PVC edge is desired. The FLEX CP40577 LAC 300 foot coil format means the material feeds naturally into common edge banding processes that rely on continuous coils, supporting uninterrupted application across multiple parts before a roll change is needed. With the manufacturer part number 301021-139 clearly defined, shops can match drawings or cut lists directly to this dimension set when specifying edges.

Using Rehau 301021-139 Edgebanding In Projects

Where This PVC Edge Banding Performs Best

The Rehau PVC edgebanding 301021-139, categorized as edge banding under edgebanding, is suited to cabinetry and woodworking projects that call for a PVC edge along exposed substrate. The 15/16 inch width works well on panels where a slight overhang is preferred for trimming, such as cabinet sides, shelves, and casework tops. With a 3mm thickness, the banding provides a substantial edge profile that pairs well with doors, drawer fronts, or panels that visually benefit from a thicker edge strip rather than a thin tape. As a FLEX CP40577 LAC coil, it supports installations where longer continuous runs are common, such as production cabinet lines or repeated shop fixtures, and where a consistent PVC edge is needed across many parts in the same job.

Why These Dimensions Support Consistent Results

The combination of 15/16 inch width and 3mm thickness on this Rehau PVC edge banding simplifies achieving consistent, repeatable edges. The slight width excess relative to typical board thickness gives room for flush trimming on both faces without risking exposure of the substrate, which reduces rework. The 3mm thickness gives more edge material to work with during trimming and finishing passes, supporting clean transitions between the face material and the PVC edge. The 300 foot coil length reduces interruptions on edge banding equipment during production runs, helping maintain constant settings and appearance from the first part to the last. Using the specific Rehau manufacturer part number 301021-139 ties all of these traits to a single, repeatable specification that can be referenced in shop standards and project documents.

Common Questions About Rehau PVC Edgebanding 301021-139

Select Rehau 301021-139 For Defined Edge Specs

Rehau PVC edgebanding 301021-139 combines a 15/16 inch width, 3mm thickness, and FLEX CP40577 LAC 300 foot coil format into one clearly defined edge solution. Those dimensions provide coverage and trimming allowance that align with typical cabinet and woodworking panel work, while the PVC formulation supports a consistent edge appearance across parts. By specifying this exact manufacturer part number through Wurth Baer Supply, shops can align drawings, purchasing, and production around a single, repeatable PVC edge banding standard.