Rehau PVC edgebanding is a PVC edge banding from Rehau, Inc. that finishes exposed panel edges so cut substrate is covered and protected during cabinet, furniture, or casework construction. The 15/16 inch width gives coverage across common panel thicknesses with a bit of overhang for trimming, which supports a flush, consistent edge after machining. The 3mm thickness creates a substantial edge profile, which helps panels stand up to routine contact along working edges and corners. The CP41002 designation identifies a specific Rehau formulation, so shops can match this edgeband to existing runs that used the same code. The edgebanding is supplied in a 300 foot length, which allows longer production runs or multiple jobs to be handled from a single roll without frequent changeovers, supporting smoother workflow in small and mid-size shops.
The 15/16 inch width on this Rehau PVC edgebanding gives installers coverage across standard sheet stock thickness while still allowing a light trim pass on both faces, which helps produce straight, chip-free edges. The 3mm thickness gives an installer a defined profile to mill or scrape without the material feeling too fragile during trimming and finishing. This edge banding is classified as Rehau PVC edgebanding in the Edge Banding product class, so it is suited to typical machine-fed or hand-fed banding operations used in woodworking shops. The 300 foot length supports continuous feeding through an edgebander, which reduces setup interruptions when processing runs of cabinet parts or furniture components.
The manufacturer part number 301021-194 identifies this Rehau PVC edgebanding as a specific edge banding option within the Rehau, Inc. range, so it can be matched to drawings or job lists that specify that exact code. As a product in the Edge Banding class, it is intended for finishing exposed edges on panels used in cabinetry, furniture, and other woodworking assemblies. The 15/16 inch width works with panels where a slight overhang is preferred before trimming, helping fabricators run parts through standard edgebanders and then flush-trim for a tight edge line. Because the material is PVC, it supports typical shop handling during cutting and machining steps after banding, helping parts move cleanly from one station to the next.
The SAP description "15/16X3MM FLX CP41002 LAC 300FT" documents the width, thickness, and length, giving production managers a clear basis for estimating yield per roll and planning job sequences so parts are batched efficiently. The combination of 15/16 inch width and 3mm thickness supports consistent trimming because operators can rely on the same overhang and profile from part to part, which reduces touch-up work on assembled cabinets or fixtures. The CP41002 reference within the description further defines the specific Rehau PVC edgebanding variant, which matters when a shop needs the same edge banding characteristics from one project to the next and wants to avoid mismatched edges on repeat jobs.
The Rehau 301021-194 PVC edgebanding has a width of 15/16 inch and a thickness of 3mm, which provides coverage and a noticeable edge profile on typical cabinet and furniture panels.
The Rehau PVC edgebanding identified as 301021-194 is supplied in a 300 foot length, allowing extended production runs before changing to another roll during edge banding operations.
Rehau 301021-194 is listed in the Edge Banding product class and Edgebanding category, so it is used to finish and protect exposed panel edges in woodworking projects.
The 3mm thickness on this Rehau PVC edgebanding creates a substantial edge that can be trimmed and finished cleanly, giving doors and panels a more defined, durable-feeling perimeter.
The CP41002 reference in the SAP description identifies a specific Rehau PVC edgebanding variant, helping shops match this roll to prior projects that used the same code.
The Rehau PVC edgebanding 301021-194 is offered by Wurth Baer Supply, a specialty wholesale distributor serving the woodworking industry with edge banding products.
This Rehau PVC edgebanding, identified as manufacturer part number 301021-194, combines a 15/16 inch width, 3mm thickness, and 300 foot length to support efficient cabinet and furniture production. As a PVC edge banding in the Edge Banding product class from Rehau, Inc., it fits directly into standard woodworking shop workflows. For projects where consistent edge size and a specific Rehau code such as CP41002 matter, this roll from Wurth Baer Supply provides a clearly defined option that can be specified on cut lists and job tickets.
Sold In: 1 Roll