Rehau PVC edgebanding 301021-230 is a PVC edge banding product from Rehau, Inc. that finishes exposed panel edges so projects present a uniform, professional edge instead of raw core material. The product belongs to the edgebanding product class, so it is intended as a dedicated edge treatment rather than a general-purpose trim. The SAP description "15/16X3MM FLX CP20729 LAC 300FT" identifies a 15/16 inch wide, 3mm thick flexible PVC strip that wraps panel edges with consistent thickness along the entire run. A 300 foot length in a single roll allows longer cabinet or furniture runs to be handled as one job, reducing splice locations along edges. The CP20729 LAC designation ties this edgebanding to a specific finish and code, which helps match the same material across repeat projects or service work.
The 15/16 inch by 3mm format in the SAP description defines how this PVC edgebanding sits on common panel edges, providing enough overhang in both directions for trimming while maintaining a controlled, repeatable thickness once applied. The flexible PVC construction described in the product data allows the strip to conform to panel edges instead of forcing straight, brittle stock into position. A continuous 300 foot length keeps the workflow moving on longer cabinet runs or repeated component sizes, because installers can cut each piece directly from the roll to suit the specific edge length being processed.
This product is identified as Rehau PVC edgebanding within the edgebanding category, so it is suited to applications where an exposed board edge needs a PVC finish rather than a painted or raw edge. The 15/16 inch width matches common panel thickness with extra coverage, so it works well on cabinet sides, shelves, and fronts that use standard sheet goods. The 3mm thickness supports projects where a pronounced edge is desired, such as doors or drawer fronts where a thicker banding visually defines the perimeter. Because the SAP description specifies a flexible PVC format, the strip can follow straight cabinet cases or mild contours used in custom woodworking without fighting the radius. The specific manufacturer part number 301021-230 also supports shop standards where a single edge profile and color code is used across multiple assemblies for visual consistency.
The 15/16 inch width gives intentional overhang beyond typical panel thickness, which provides material to trim back to a clean, flush edge after bonding, supporting a crisp line instead of relying on perfect alignment during placement. The 3mm thickness maintains a uniform build along the full edge, which supports even trimming and sanding workflows from one panel to the next. The flexible PVC construction referenced in the product data lets the edgebanding seat tightly along the substrate without requiring excessive force, which supports adhesive contact along the full length of the strip. The 300 foot roll length reduces the frequency of roll changes, so long case runs or matched sets of components can be processed from the same continuous stock, supporting consistent appearance and edge feel across the entire project.
Rehau PVC edgebanding 301021-230 is a PVC edge banding product from Rehau, Inc., used to cover and finish exposed panel edges in woodworking and cabinet applications.
The product is specified in the SAP description as 15/16 inch by 3mm, giving extra width for trimming and a 3mm thick edge profile after application.
The SAP description lists a 300 foot length, allowing long cabinet runs or multiple components to be edged from one continuous roll under a single part number.
This product is identified as PVC edgebanding, so it uses PVC material to provide a consistent, formable strip for finishing panel edges.
The 3mm thickness creates a defined, substantial edge that supports a solid feel and consistent trimming, especially on cabinet doors and drawer fronts.
The 15/16 inch width covers common panel thicknesses with some overhang, which supports flush trimming on various casework and shelving dimensions.
This Rehau PVC edgebanding 301021-230 pairs a 15/16 inch width, 3mm thickness, and 300 foot roll length to support repeatable cabinet and woodworking edge treatment. Using this specific manufacturer part number keeps finish, size, and material consistent across production runs.
Sold In: 1 Roll