Rehau PVC edgebanding 301021-270 is a Rehau, Inc. edge banding built for woodworking projects that need a consistent edge detail. The 15/16 inch width covers typical panel thicknesses with a bit of margin, which helps installers trim flush without exposing the substrate. The 3mm thickness creates a substantial edge profile, adding impact at corners where panels take the most abuse in everyday use. The PVC material gives a uniform surface that accepts fabrication processes reliably, so cuts and trims stay predictable from job to job. The FLEX designation in the SAP description signals a flexible product, which supports routing around gentle radiuses common in cabinet and casework layouts. A 300 ft roll format supports longer production runs or multiple installations, reducing changeover time between pieces. The CP20856 LAC identification helps shops align this banding with their panel or design program when they are matching existing runs.
The 15/16 inch width of this Rehau PVC edgebanding gives installers slight overhang on common panel thicknesses, so trimming tools can cut back to a flush face without risking a short edge. The 3mm thickness provides enough material to shape a smooth, rounded profile at the edge, which is useful when running standard trimming and scraping tools. Being a FLEX product means the banding is suited to typical straight cabinet edges and gentle curves that appear in many woodworking layouts. The 300 ft roll length is suited to shops that want to set up an edgebander and run a full batch of parts without frequent roll changes, which supports steadier workflow and consistent machine settings.
This Rehau PVC edge banding sits in the Miscellaneous Edgebanding category, making it a natural fit anywhere a raw panel edge needs covering in cabinetry or casework. The 15/16 inch width aligns with common panel sizes used in shops, giving a dependable fit across doors, drawer fronts, and carcass edges. The 3mm thickness adds a noticeable edge profile that works well on vertical fronts where visual detail matters, such as kitchen cabinets or commercial fixtures. Because the SAP description references FLEX CP20856 LAC, installers can use it on linear runs and on modest curves found on contemporary cabinet designs. The 300 ft roll length works particularly well in small to mid-sized production runs, where a single roll can handle edging for a full room of cabinets or a bank of casework without interruption.
The 15/16 inch x 3mm sizing provides a predictable combination that cabinet shops can standardize in their tooling, which reduces setup changes across different pieces in the same job. The PVC material offers a homogeneous structure, so trimming knives and scrapers encounter the same resistance along the length of the edge, helping maintain smooth cuts and reducing rework. The FLEX designation contributes to easier handling at the edgebander, as the banding tracks around feed rollers and guides without fighting the machine path. The 300 ft roll length lets operators dial in feed speed and temperature settings for this specific banding and run a consistent program, which supports uniform edges from the first panel to the last. The 301021-270 and CP20856 LAC identifiers give purchasing and production teams a fixed reference, tying machine setups and material pulls back to a single, defined product.
Rehau PVC edgebanding 301021-270 is described as 15/16 inch wide by 3mm thick, giving a slightly oversized edge for trimming and a substantial profile once applied.
The FLEX designation in the SAP description indicates a flexible edge banding, which supports use on straight cabinet edges and gentle curves common in many layouts.
The 300 ft length allows longer continuous runs on an edgebander, helping shops process multiple cabinets or panels before stopping to change rolls.
The 3mm thickness builds a pronounced edge that can better protect panel corners and give doors or fronts a more substantial visual line in finished installations.
The 15/16 inch width provides slight overhang on typical panel thicknesses, so installers can trim back to a flush, clean face without exposing the core.
The CP20856 LAC reference ties this edge banding to a specific Rehau program, helping shops match material to their existing design or panel specifications.
Rehau PVC edgebanding 301021-270 from Wurth Baer Supply pairs a 15/16 inch width with a 3mm thickness and FLEX construction to support dependable cabinet and casework edges. The 300 ft roll length and defined CP20856 LAC program reference help shops align purchasing, machine setup, and material pulls around one consistent edging choice. For runs that call for PVC edge banding with these dimensions and identifiers, this Rehau, Inc. product offers a clear, repeatable option.
Sold In: 1 Roll