Rehau PVC edgebanding 301021-297 15/16 x 3mm

Rehau PVC Edgebanding 301021-297 For Panel Edges

Rehau PVC edgebanding 301021-297 is a PVC edge banding from Rehau, Inc. that covers exposed panel edges, so raw board edges are concealed and the finished part looks consistent along the perimeter. The SAP description 15/16X3MM FLEX CP60526 EMB LAC 300FT identifies a 15/16 inch wide, 3mm thick flexible strip, giving you a substantial edge profile often used on cabinet and furniture components. The FLEX notation indicates the material is flexible, so it forms to straight runs and gentle curves without fighting the substrate during application. The CP60526 EMB LAC detail points to an embossed, lacquered surface, creating a textured, coated face that visually dresses the panel edge. The 300FT length reference defines a continuous roll, supporting longer runs and multiple parts from a single product.

Key Rehau PVC Edgebanding Details For Shops

• The 15/16 inch width from the 15/16X3MM FLEX CP60526 EMB LAC 300FT description covers standard panel thicknesses with margin for trimming, helping produce clean, flush edges after machining.
• The 3mm thickness in the SAP description builds a pronounced edge profile, so cabinet and furniture parts gain a sturdy-looking front edge that aligns with heavier contemporary designs.
• The FLEX designation signals flexible PVC construction, allowing easier handling at the edgebander and more consistent contact around mild curves or panel irregularities.
• The CP60526 EMB LAC wording indicates an embossed, lacquered surface, which gives the banding a finished, textured face that visually upgrades raw substrate edges.
• The 300FT length description defines an extended run capacity, so larger jobs or repeated production parts can be processed from one roll with fewer changeovers.

Installation Fit And Use Of This PVC Edgeband

The 15/16X3MM FLEX CP60526 EMB LAC 300FT description defines how this Rehau PVC edge banding fits typical shop setups. The 15/16 inch width provides overhang on common panel thicknesses, giving edgebanders and trimmers material to cut back to a flush edge without exposing the core. The 3mm thickness pairs well with heavier door and panel designs, so the applied edge visually matches thicker fronts and work surfaces. The FLEX indication reflects a flexible PVC formulation that tracks smoothly through standard edge banding machines, helping maintain consistent pressure along the glue line. The CP60526 EMB LAC details point to an embossed, lacquered finish on the visible face, so once applied and trimmed, the edge presents as a finished surface that ties into surrounding components.

Using Rehau Edge Banding In Woodworking Projects

Where This Rehau PVC Edgebanding 301021-297 Works

The product name Rehau PVC Edgebanding, 301021-297, and its category listing as Edge Banding define it as a solution for finishing exposed panel edges in woodworking projects. The 15/16X3MM size reference aligns with cabinet carcasses, shelving, and furniture panels that need a substantial edge treatment. As a flexible PVC edge banding, it suits shops that run edgebanders on casework, closet components, and similar panel constructions where a 3mm front edge is desired. The CP60526 EMB LAC wording signals an embossed, lacquered surface, so this banding can visually coordinate with panel faces specified to match the CP60526 design, supporting consistent appearance across doors, drawer fronts, and tops. The 300FT length reference supports larger runs of similar components in production settings.

How The Verified Details Support Consistent Results

The 3mm thickness defined in the 15/16X3MM FLEX CP60526 EMB LAC 300FT description creates a robust edge profile, so trimming operations still leave a substantial band visible and aligned with design expectations. The 15/16 inch width allows standard overhang on common panel sizes, giving room for precise top and bottom trimming while still fully covering the substrate edge. The FLEX designation reflects flexibility in the PVC material, so the banding tracks smoothly along edges and around mild curves, promoting even glue-line contact and reducing the tendency of the strip to spring away. The CP60526 EMB LAC specification indicates an embossed, lacquered face, which means the visible edge surface is already finished when it exits the edgebander, reducing downstream finishing steps. The 300FT length cited in the SAP description supports repeated setups using the same roll, helping maintain color and texture continuity across multiple pieces in the same project.

Common Questions About This Rehau Edge Banding

Select Rehau PVC Edgebanding 301021-297 For Your Next Run

The SAP description 15/16X3MM FLEX CP60526 EMB LAC 300FT and manufacturer part number 301021-297 define a specific Rehau PVC edge banding that fits panel-edge finishing tasks. The width, 3mm thickness, and flexible PVC construction align with common cabinet and furniture workflows where a pronounced edge is required. The embossed, lacquered CP60526 surface supports visual coordination with matching panel designs across a project. For production or repeat work that demands consistent edges, this Rehau PVC edgebanding 301021-297 offers a clearly defined size, finish, and roll length to match planned runs.