Rehau PVC edgebanding 301021-299 is a PVC edge banding designed to finish exposed edges on panels so the job has a defined, uniform edge instead of a raw board edge. The 15/16 inch width covers standard panel thickness with a bit of overhang, giving room to trim flush for a tight-looking edge line. The 3mm thickness builds a solid edge profile that feels substantial at cabinet and furniture touch points. The FLEX designation identifies a flexible material, which helps the edgeband follow slight curves and panel tolerances during installation. The CP21104 reference defines a specific color and surface combination, supporting consistent visual matches across multiple parts on the same project. The embossed lacquer finish adds texture and a sealed surface, so the edge reads as a finished face rather than a cut edge. The 300ft length supports longer runs and repeat work on the same job.
The 15/16 inch width on this Rehau PVC edge banding gives coverage beyond the edge of standard sheet goods, which allows trimming equipment to cut back to a precise flush finish along the panel. The 3mm thickness offers a heavier edge that reads as a deliberate design detail rather than a thin strip, which can be useful on doors and drawer fronts that see frequent handling. The FLEX material characteristic allows the edgeband to sit down along the full edge length, helping reduce gaps where panels may vary slightly. Together, these dimensions and material traits support repeatable edge results on cabinetry, furniture components, and other woodworking projects using sheet stock.
This Rehau PVC edge banding is sized at 15/16 inch by 3mm, so it suits applications where the edge needs both coverage and a pronounced profile. On cabinet cases, the extra width lets the installer trim back to the panel face after bonding, which helps maintain straight lines along runs of boxes. On doors and drawer fronts, the 3mm thickness builds a stronger edge detail that complements modern panel constructions. The CP21104 embossed lacquer finish supports projects that call for a textured, coated look at the edges, tying the edge appearance to finished surfaces across multiple components. The 300ft roll format lines up with shop runs where the same edge specification repeats across many parts.
The flexible PVC construction identified by FLEX lets this edgebanding follow panel edges without fighting minor deviations, which helps adhesive bonds sit uniformly along the length. The 15/16 inch width provides trimming allowance, so edge banding equipment can cut back to a consistent reveal on every part in the batch. The 3mm thickness stabilizes the edge during handling and machining, helping keep edges looking uniform after routing or flushing operations. The CP21104 color/finish code keeps edge appearance predictable across reorders, supporting shops that run standard programs. The embossed lacquer surface also establishes a defined texture, so finished edges present as intentional design elements within cabinet and furniture assemblies.
Rehau PVC edgebanding 301021-299 is specified as 15/16 inch wide by 3mm thick, providing trimming allowance and a substantial edge profile for cabinet and furniture panels.
The FLEX designation indicates a flexible PVC material, which allows the edgebanding to follow panel edges and slight curves, supporting consistent bonding along the entire edge length.
The CP21104 embossed lacquer finish gives the edgebanding a textured, sealed surface, helping the finished edge visually align with coated panel faces on cabinetry and furniture parts.
The 3mm thickness creates a more pronounced edge profile, which supports a solid feel at doors, drawer fronts, and panel edges that see regular handling in service.
The 15/16 inch width extends beyond typical panel faces, giving room to trim back to a flush, straight edge for consistent lines across multiple casework parts.
The 300ft roll length supports longer production runs using the same edge specification, reducing changeovers and helping keep panel edging workflows moving efficiently.
Rehau PVC edgebanding 301021-299 combines 15/16 inch width, 3mm thickness, FLEX PVC, and a CP21104 embossed lacquer finish to support consistent, finished edges on panel-based work. The 300ft roll length aligns with shop runs where the same edge is used repeatedly. For projects built around these dimensions and finish characteristics, this edge banding provides a defined way to carry one edge specification across doors, drawer fronts, and case components on the job.
Sold In: 1 Roll