Rehau PVC edgebanding 301021-303 is a PVC edge banding designed to finish panel edges on woodworking and cabinet projects, giving raw board edges a durable PVC face that matches the job specification. The 15/16 inch width stated in the description covers standard panel thickness with a small margin, so installers can trim flush without leaving exposed substrate. The 3mm thickness provides a substantial PVC edge, which supports a solid feel at doors, drawer fronts, and case edges where frequent contact is expected. The FLEX designation indicates a flexible PVC construction, which helps the edgeband follow normal cabinet-grade curves and minor surface variations during application. The CP21154 EMB LAC description indicates an embossed and lacquered finish, giving the edge a textured, finished surface that visually coordinates with decorative faces. The 300FT length provides a continuous run suitable for production or multi-cabinet jobs, helping reduce changeovers during banding operations.
The Rehau PVC edgebanding, 301021-303, uses a 15/16 inch width that gives installers enough overhang on standard panels to trim flush after application, supporting clean edges across cabinet runs. Its 3mm thickness works well with common edgebanders and trimmers, so the PVC edge can be shaped and finished in a consistent pass. The FLEX designation in the description means the PVC material is formulated for flexibility, helping the tape seat tightly along straight runs and gentle contours during bonding. The CP21154 EMB LAC reference describes an embossed, lacquered surface, giving the material a finished PVC face that visually complements matching decorative panels through the full installation.
This Rehau PVC edgebanding, identified as edge banding in the product class, is suited for closing off exposed panel edges in woodworking and cabinet construction. The 15/16 inch width described in the SAP data aligns with typical cabinet carcass and front components, so a single pass can cover the board edge with trimming allowance on both sides. With a 3mm thickness documented in the description, the banding creates a substantial edge profile often used on doors, drawer fronts, and verticals where a thicker PVC look is desired. The FLEX notation supports use on cabinet edges that require some conformance to minor irregularities, allowing the material to follow the substrate during edgebanding. The CP21154 EMB LAC finish description points to an embossed and lacquered PVC surface, so when used on matching programs the edge and face share the same visual design.
The specified 15/16 inch width on Rehau PVC edgebanding 301021-303 gives repeatable trimming allowance, which helps shops set up machines once and produce consistent flush edges across many parts. The 3mm thickness described in the SAP data offers a stable PVC section that responds predictably to trimming and scraping, supporting uniform edge profiles from part to part. The FLEX characteristic in the description aids in seating the banding along the panel edge during application, which supports consistent adhesion lines and reduces the chance of edge lift in normal cabinet environments. The CP21154 EMB LAC embossed, lacquered description signals a defined surface structure, allowing installers to align a specific decorative design across doors, drawer fronts, and casework edges. The 300FT length supports production runs and repeat projects by giving shops a consistent material reference under the same part number, simplifying reorders when the same edge appearance is required again.
Rehau PVC edgebanding 301021-303 is described as 15/16 inch wide by 3mm thick, giving installers trimming allowance and a substantial PVC edge for cabinet and panel work.
The FLEX designation in the SAP description indicates a flexible PVC construction, helping the edgebanding follow normal cabinet edges and seat smoothly during application.
The CP21154 EMB LAC reference indicates an embossed, lacquered PVC surface, providing a textured, finished edge that visually coordinates with matching decorative designs.
The SAP description lists 300FT, so the edgebanding is supplied in a 300-foot length suitable for multi-part or production cabinet projects.
This PVC edgebanding, in the edge banding product class, suits closing exposed panel edges on cabinets and other woodworking projects using matching decorative faces.
The 3mm thickness described provides a robust PVC edge that handles trimming and everyday contact well, supporting a substantial profile on cabinet doors and drawer fronts.
Choose Rehau PVC edgebanding 301021-303 when a 15/16 inch by 3mm flexible PVC edge is required to match a CP21154 EMB LAC decorative design. The embossed, lacquered surface and 300FT length support consistent edges across cabinet components and repeat jobs.
Sold In: 1 Roll