Rehau PVC edgebanding 301021-304 15/16 x 3mm

Rehau PVC Edgebanding 301021-304 For Clean Edges

Rehau PVC edgebanding 301021-304 is a Rehau, Inc. PVC edge banding designed to finish exposed panel edges, so cabinet and furniture projects present a clean, professional look. The 15/16 inch width covers typical 3/4 inch panels with a margin, which helps installers trim flush without risking a visible glue line. Its 3mm thickness provides a substantial edge profile, supporting a solid feel where panels are frequently handled. The FLEX designation indicates a flexible construction, so the strip follows straight runs and gentle contours without fighting the substrate. The CP41544 EMB LAC description identifies an embossed lacquer surface, giving the band a textured, finished face that visually upgrades panel edges. Supplied in a 300 foot length, the roll supports longer production runs and repeat jobs while keeping the edge color and texture consistent across multiple components.

Key Rehau Edge Banding Details That Matter

• The 15/16 inch width gives coverage past standard 3/4 inch boards, so trimming back to the panel face leaves a clean margin that helps hide minor alignment variation.
• The 3mm thickness creates a robust edge profile, which supports edges on cabinet sides, shelves, or tops that see regular contact over the life of the installation.
• The FLEX construction lets the band follow typical cabinet and casework layouts, which simplifies handling at the edgebander and reduces problems on slightly irregular panels.
• The CP41544 EMB LAC designation identifies an embossed lacquer surface, so the edge presents a finished, textured face that visually coordinates with higher-end panel work.
• The 300 foot roll format supports extended runs on a line, which helps maintain color and finish continuity across multiple cabinets or related components in the same project.

Edgeband Size And Finish For Straightforward Installation

This Rehau PVC edge banding in 15/16 inch by 3mm is sized for typical casework, so operators can set up edgebanders for common 3/4 inch substrates with minimal adjustment. The extra width beyond the core panel thickness provides room for top and bottom trimming units to flush the band without exposing the substrate. The 3mm profile works with machinery and trimming tools designed around thicker edges, supporting smooth milling at corners. The PVC material is suited to standard edgebanding processes, so it fits into existing shop workflows. The CP41544 embossed lacquer surface arrives already textured and finished, which means that once bonded and trimmed, the edge visually matches the intended appearance without separate edge finishing steps.

Using This Rehau PVC Edgebanding In Woodworking

Where Rehau PVC Edgebanding 301021-304 Fits Best

As a PVC edge banding from Rehau, Inc., this product is suited to woodworking projects that call for a consistent synthetic edge on panels. The 15/16 inch width is aligned with cabinet and furniture parts cut from 3/4 inch sheet goods, so it pairs well with sides, shelves, and vertical partitions. Its 3mm thickness provides a more substantial edge than thin tape-style edgebands, giving casework a defined profile at door and panel intersections. The FLEX description supports use on straight edges and gentle curves encountered in many cabinet runs. With the CP41544 EMB LAC embossed lacquer face, the edging visually finishes cabinet carcasses, shelving, and similar components where a textured, lacquered appearance is specified as part of the design.

Details That Support Repeatable Edge Banding Results

The defined 15/16 inch by 3mm size helps shops dial in edgebander settings and repeat them across runs, which supports consistent reveals and reduces fine-tuning from job to job. Because the width exceeds the core panel thickness, trimming operations can remove minor edge overhang while still leaving full coverage. The 3mm thickness interacts predictably with pressure rollers and trimming heads, which matters when dialing in feed speeds and cutter positions. The FLEX construction works with standard feeding and bending through the machine path, helping reduce stress at the glue line where panels have slight variation. The CP41544 EMB LAC embossed lacquer surface stays integral to the band, so after trimming and scraping, the finished edge maintains the same texture and sheen across the entire length, supporting uniform appearance from cabinet to cabinet.

Common Questions About Rehau PVC Edgebanding 301021-304

Select Rehau PVC Edgebanding 301021-304 For Your Next Run

Rehau PVC edgebanding 301021-304 combines a 15/16 inch by 3mm format, FLEX construction, and a CP41544 EMB LAC embossed lacquer surface to support clean, consistent panel edges. Add this 300 foot roll to your job so cabinet and furniture edges match your specified look across the project.