Rehau PVC edgebanding gives cabinet and fixture builders a dedicated edge banding solution based on PVC material, so exposed board edges can be covered with a consistent profile for a finished, job-ready appearance along straight or gently curved runs.
The 15/16 inch width matches common panel thickness situations where slight overhang is preferred, so installers can trim back to a flush, tight edge that hides the core and supports precise detailing on cabinet sides or shelves.
The 3mm thickness creates a visibly defined edge profile, so impact zones such as cabinet fronts or work panels gain a more substantial edge band than thin tape-style options, which supports a sturdy, professional look in high-contact areas.
The flex CP60117 LAC designation identifies this as a flexible edgebanding variant, so it can follow gentle curves or minor irregularities in case construction while staying manageable at the bench during layout.
The 300ft length per roll supplies a continuous run suitable for multiple cabinets or a full project phase, so shops can edge many pieces from a single roll and keep color and profile consistent across related parts.
The PVC material called out in the product name defines how this edgebanding behaves during installation, so heat-based application and standard trimming tools can be selected to match PVC response and help produce clean, chip-free edges on cabinet parts.
The 15/16 inch width specified in the SAP description gives enough coverage to span typical panel thicknesses with a small margin, so edgebanding can be positioned quickly and then trimmed down to match the exact board dimension without leaving gaps.
The 3mm thickness described in the SAP data establishes a substantial edge layer at the panel perimeter, so cutters and hand tools can be set for that depth, allowing repeatable trimming passes that leave a crisp shoulder between the face material and the edge.
The 300ft length noted in the description sets the planning range for a job, so shops can allocate one roll to a run of casework and calculate how many panels, shelves, or doors can be edged from a single product number without changing materials midstream.
The product name Rehau PVC edgebanding, 301021-312, identifies this as a Rehau, Inc. edge banding product, so shops working with Rehau materials can match this part number across jobs and maintain consistent sourcing for ongoing cabinet or fixture lines.
The product class listing as edge banding places this item firmly in the role of finishing exposed panel edges, so it becomes part of the standard sequence after cutting and machining boards, closing off raw edges before drilling, assembly, or on-site fitting.
The 15/16 x 3mm dimensions noted in the SAP description define both coverage and profile, so layout can account for the slightly overwide strip and thicker edge, allowing operators to stage panels with enough clearance for trimming and edging without reworking cuts.
The flex CP60117 LAC designation signals a flexible edgebanding configuration within Rehau offerings, so fabricators handling mild curves, cabinet returns, or non-perfect panel alignments can route this material around those paths while staying within the specified thickness and width.
The 300ft roll length shown in the SAP description supports production-style workflows, so once the roll is loaded and oriented, long cabinet sides, multiple shelves, or repeated drawer components can be edged in sequence without pausing to switch to another length or color.
The connection to Rehau, Inc. as the brand links this edgebanding to a defined manufacturer identity, so purchasing, inventory, and reordering can all reference the same manufacturer part number 301021-312 when expanding or repeating a successful casework run.
The 3mm thickness works together with the PVC composition to give a pronounced, solid-feeling edge, so panel sides on cabinets or fixtures present a substantial band that can visually tie together with other 3mm-edge components in the same space.
The 15/16 inch width interacts with typical substrate thicknesses to leave manageable excess, so trimming tools can be dialed in for a single pass that removes overhang and leaves edges flush instead of juggling narrow margins that are harder to align.
The flex CP60117 LAC notation distinguishes this roll from non-flex variants in a catalog, so planners can specify this part when assemblies require a bit of conformance around gentle arcs or alignment variations while still holding to 3mm edge parameters.
The product class as edge banding and the SAP description together define it as a continuous roll solution, so casework shops, millwork teams, or woodworking operations can integrate this specific Rehau PVC edgebanding into standard cut lists and job costing as a repeatable line item.
Rehau PVC edgebanding 301021-312 is a PVC edge banding product, so it behaves like a plastic edging during application and trimming and fits into workflows built around PVC materials.
The Rehau edge banding is specified as 15/16 inch wide and 3mm thick, so it covers common panel edges with a substantial profile suitable for trimming to a flush finish.
The Rehau PVC edgebanding with SAP description 15/16X3MM FLEX CP60117 LAC 300FT is supplied in a 300ft length, so one roll can service multiple cabinets or a larger run of parts.
The flex CP60117 LAC description identifies this Rehau edgebanding as a flexible PVC variant, so it can follow gentle curves or panel irregularities within the given 3mm thickness and 15/16 inch width.
This product is classified as edge banding in the edge banding product class, so it is intended specifically for finishing exposed panel edges in woodworking and casework builds.
The manufacturer part number for this Rehau PVC edgebanding is 301021-312, so purchasing and shop teams can reference this code to match the same material on future jobs.
The combination of PVC construction, 15/16 inch width, and 3mm thickness gives this Rehau edgebanding a clear role in closing off cabinet and panel edges, so it fits neatly into woodworking projects that call for a substantial, consistent edge profile.
The flex CP60117 LAC labeling and 300ft roll length position this 301021-312 part number for shops handling repeated casework or mild curves, so choosing this specific Rehau PVC edgebanding supports uniform edges across a full run of related components.
Sold In: 1 Roll