Rehau PVC edgebanding gives you a dedicated edge banding solution from Rehau, Inc. in a flexible PVC material, so you can finish exposed board edges with a consistent synthetic edge instead of leaving raw substrate on cabinets or furniture panels. The 15/16 inch width covers standard panel thickness with a bit of overhang, helping you trim back to a flush edge without exposing the core. The 3mm thickness provides a substantial edge profile, so routed corners feel solid rather than thin. The flexible construction, called out as FLEX in the description, lets the strip conform during application, which supports smoother runs along straight sections and gentle curves. The CP60213 LAC designation identifies the specific color or finish series, so repeat orders match prior work when the same code is referenced. A continuous 300ft length supports longer production runs and reduces changeovers on the edgebander.
The 15/16 inch width on this Rehau edge banding gives you coverage beyond common panel thicknesses, which helps when aligning the band slightly proud before trimming back flush. The 3mm thickness creates a solid edge profile that can handle typical trimming and light profiling steps without cutting through to the substrate. The flexible PVC structure works well with standard edge banding equipment, so the band can be fed, bonded, and trimmed as part of a normal workflow on casework or furniture components that need a uniform synthetic edge.
This Rehau PVC edgebanding, identified as 301021-313, is suited for edging cabinet or furniture panels where a PVC edge is desired instead of an exposed board edge. The 15/16 inch width addresses full panel edges with enough excess for trimming, which is useful on melamine, laminate-faced, or similar sheet goods that need a finished perimeter. The 3mm thickness delivers a more substantial edge compared with thin tape-style banding, giving doors, drawer fronts, and vertical panels a sturdier look and feel. The FLEX note in the description points to a flexible banding construction, so the material can follow panel edges and gentle radius workpieces when fed through appropriate equipment.
The defined 15/16 inch by 3mm size helps operators standardize machine setups, because the trim, pressure, and edge profiling steps can be tuned around a known banding thickness and width. The CP60213 LAC code gives a repeatable reference when matching previous jobs that used the same Rehau material, supporting consistent color or finish alignment across replacement doors or add-on cabinets. Having a continuous 300ft length on hand limits interruptions during longer runs, which supports more uniform results since machine temperatures, feed rates, and settings stay stable over extended edging cycles on production work.
Rehau 301021-313 PVC edgebanding is described as 15/16 inch wide by 3mm thick, giving a generous trim margin and a substantial edge profile on cabinet or furniture panels.
The flexible PVC construction, noted as FLEX, lets the banding conform along panel edges and gentle curves, supporting smoother application on standard edgebanding equipment.
The CP60213 LAC description identifies a specific Rehau appearance series, so using the same code helps maintain consistent edge look across multiple projects.
The 300ft length allows extended runs on an edgebander, which reduces coil changes and helps keep cabinet or panel edging workflows continuous.
The 3mm thickness provides a heavier edge band that supports trimming, light profiling, and a more substantial finished edge on doors and casework.
This Rehau edgebanding is identified by manufacturer part 301021-313, CP60213 LAC description, and 15/16x3mm size for consistent reorders.
This Rehau PVC edgebanding from Wurth Baer Supply pairs a 15/16 inch width with a 3mm thickness to create a substantial, trimmable edge on cabinet and furniture panels. The flexible PVC construction described in the product data supports standard edgebanding workflows, and the CP60213 LAC and 301021-313 identifiers anchor repeat orders to the same appearance. For production or shop use, the 300ft length aligns well with multi-piece runs where consistent edge treatment matters across every finished panel.
Sold In: 1 Roll