Rehau PVC edgebanding 301021-317 is a Rehau, Inc. edge banding from the AU WF442 Chique line, so it is designed as a PVC solution for covering exposed panel edges in woodworking projects where that specific color and pattern are required. As a PVC edgebanding, it provides a consistent synthetic edge surface, helping panels present a uniform appearance from face to edge in finished cabinetry or furniture runs. The 15/16 inch width gives coverage across standard panel thicknesses with a bit of tolerance, which helps hide minor edge variation during installation while still fully covering the substrate. The 3mm thickness creates a more substantial edge profile than thin tape, which supports a sturdier-feeling edge that stands up to regular handling on doors, drawer fronts, or casework sides.
The 15/16 x 3mm size on this Rehau PVC edgebanding aligns well with standard panel thicknesses, which supports straightforward alignment on edge-banding equipment without extensive setup changes between jobs. The 3mm thickness works with common edgebander trimming and scraping stations, allowing operators to dial in edge quality using familiar settings. The 300 FLX description indicates a flexible format length suited to continuous feeding through automatic equipment, helping reduce joins on long parts. With a defined width, thickness, and decor series, shops can tune feed speed, heat, and pressure around this specific product and then repeat those parameters whenever 301021-317 is specified again.
This Rehau PVC edgebanding 301021-317 belongs to the Miscellaneous | Edgebanding category and the Edge Banding product class, placing it squarely in the standard materials set for cabinet, furniture, and casework edges. Being part of the AU WF442 Chique line, it serves projects that call for that specific decor reference, which helps shops maintain visual continuity across doors, drawer fronts, and cabinet bodies that specify the same series. The 15/16 inch width works across vertical and horizontal edges on typical sheet goods, so a single banding size can cover a wide range of parts on a job. With 3mm thickness, this edge banding is well suited to high-contact locations such as front edges of shelving or cabinet doors, where a more substantial edge detail is desired for both appearance and feel.
The defined 15/16 inch width on this PVC edge banding gives installers predictable overhang, which simplifies setting up trim stations for a consistent flush edge over multiple parts. The 3mm thickness allows edgebanders to run proven settings for similar thick edge materials, helping maintain uniform scraping and corner rounding quality from piece to piece. Because the product is clearly identified as Rehau PVC edgebanding in the AU WF442 Chique family, shops can log machine parameters under the 301021-317 part number and reuse them whenever that part is pulled from inventory. The 300 FLX length format supports feeding continuous strips along long cabinet sides or batch runs of doors, which reduces interruptions during production and helps maintain an even finish across the full job.
Rehau 301021-317 is a PVC edgebanding in the Edge Banding product class, so it is used to cover exposed panel edges on cabinetry, furniture, and other woodworking projects.
The 15/16 x 3mm size means the edgebanding provides slight width overhang and a 3mm thick edge, supporting full coverage of common panel edges and creating a substantial, durable edge profile.
The AU WF442 Chique description identifies the specific decor series, helping shops match this PVC edgebanding to panels or past work that specifies the same Rehau line.
The Manufacturer Part 301021-317 provides an exact reference, allowing accurate reordering and ensuring color, width, and thickness match previous installations using this banding.
The 300 FLX designation identifies a flexible length format, so shops can run longer parts or repeated components with fewer splices during edgebanding operations.
This Rehau PVC edgebanding 301021-317 covers and finishes raw panel edges, helping cabinets, shelves, and fronts present a consistent AU WF442 Chique appearance across the entire project.
Rehau PVC edgebanding 301021-317 from the AU WF442 Chique line combines a defined 15/16 x 3mm size with a clearly identified decor series, giving shops a repeatable edge solution when that reference is specified. The PVC construction and 3mm thickness support everyday cabinet and furniture use where a substantial edge detail is preferred. With the 300 FLX flexible length format, this banding suits production environments that run continuous parts or batches under consistent machine settings. When a project calls for AU WF442 Chique in this dimension, selecting 301021-317 aligns panel edges with the specified Rehau finish.
Sold In: 1 Roll