Rehau PVC edgebanding identified as 301021-319 provides a PVC edge banding solution that covers and finishes raw panel edges, so cabinet and furniture projects gain a consistent, workable edge surface. The SAP description "15/16X3MM FLEX CP41318 EMB LAC 300FT" indicates a 15/16 inch wide, 3mm thick flexible PVC strip, which matches common panel thicknesses and supports robust edge coverage in woodworking applications. The 300 ft length stated in the description provides a long run of edge material, which helps installers handle multiple components or repeat jobs from a single coil. The edge banding belongs to the Edge Banding product class and Edgebanding category, so it fits standard workflows where raw substrate edges need a PVC finish. The Rehau, Inc. brand designation ties this edgebanding to a recognized manufacturer of PVC edging for panels.
The SAP description "15/16X3MM FLEX CP41318 EMB LAC 300FT" specifies the dimensional format that guides installation planning. The 15/16 inch width allows installers to position the banding with controlled overhang on typical panel edges, then trim back to a precise line using standard edge trimmers. The 3mm thickness provides a pronounced edge layer that seats firmly against the substrate, which supports smooth alignment along the panel face. The flexible PVC construction referenced by FLEX CP41318 means the strip can be handled on conventional PVC-capable edgebanders or applied with appropriate edging processes for PVC material. The 300 ft length gives a continuous run, which supports consistent setup conditions across multiple parts in a project.
The product name "Rehau PVC Edgebanding, 301021-319" and the Edge Banding product class align this material with cabinet, furniture, and panel-based woodworking where raw edges need a PVC finish. The 15/16 inch width stated in the SAP description works with panel constructions that finish near that dimension, giving a manageable overhang for trimming on casework, shelves, and door components. The 3mm thickness supports use on exposed edges where a more substantial PVC layer is preferred, such as cabinet fronts or work surfaces that see regular contact. Because the description identifies the banding as FLEX CP41318, the flexible PVC nature supports use on straight runs and modest contours commonly found in interior fixtures. The 300 ft length listed in the description fits production or shop settings that process multiple components in sequence.
The defined 15/16 inch by 3mm format allows installers to standardize machine or hand-trimming setups, because the same overhang and thickness repeat from piece to piece. The flexible PVC referenced by FLEX CP41318 supports a predictable feed and wrap along panel edges, which helps maintain consistent glue line coverage and edge seating during runs. The 300 ft coil length reduces the number of material splices within a project, supporting steady feed characteristics and consistent appearance across all edged parts that use this roll. The PVC material called out in the product name means the banding behaves in a known way with PVC-focused processes, allowing established heat and feed parameters to be applied for reliable bonding. The Edge Banding product class and Edgebanding category confirm its role as a dedicated edging material, so it slots cleanly into existing edging stations or workflows built around PVC strips.
Rehau PVC edgebanding 301021-319 is described as 15/16X3MM, so it provides a 15/16 inch wide, 3mm thick edge strip, giving installers consistent overhang and a solid edge profile for trimming.
Rehau PVC edgebanding 301021-319 is listed with a 300FT length, providing extended footage from one roll so larger runs or multiple cabinet components can be edged without frequent material changes.
Rehau 301021-319 is identified as PVC edgebanding, so it uses a PVC thermoplastic composition that works with standard PVC edgebanding processes used in woodworking shops.
Rehau PVC edgebanding 301021-319 is specified as 3mm thick, matching applications that call for a 3mm PVC edge profile on cabinet or furniture panels.
Rehau PVC edgebanding 301021-319 uses a 15/16 inch width that provides slight overhang on typical panels, giving room to trim back to a clean, flush edge after bonding.
Rehau PVC edgebanding 301021-319 is described as FLEX CP41318, indicating a flexible PVC construction that follows straight edges and gentle contours in normal edging setups.
Rehau 301021-319 PVC edgebanding combines a 15/16 inch width, 3mm thickness, and flexible PVC construction in a 300 ft format, giving a defined edging solution for cabinet and panel projects. The Edge Banding product class and Edgebanding category position it for use wherever raw panel edges require a PVC finish. For shops and installers who work with PVC edging, this specific size and format supports repeatable settings and uniform results across multiple parts. Selecting this Rehau PVC edgebanding aligns the material choice with known dimensions and a clearly identified manufacturer part number.
Sold In: 1 Roll