Rehau PVC edgebanding 301021-322 is a PVC edge band designed to finish exposed panel edges, so cabinet and fixture projects present a clean, uniform line instead of raw board. The SAP description lists a 15/16 inch by 3mm size, giving coverage that fully caps standard panel thickness with a bit of overhang to trim for a tight, flush edge. The description also notes FLEX, indicating a flexible PVC construction that follows panel contours during application, which helps installers keep edges straight without fighting stiff material. The CP20625 detail identifies a specific color or pattern code, supporting consistent visual matches across multiple jobs. An EMB LAC reference appears in the description, tying this banding to a defined finish style for coordinated casework runs. The 300FT notation specifies a 300 foot length, which supports longer production runs or multiple smaller projects from a single roll.
The SAP description lists this Rehau PVC edgebanding as 15/16 inch by 3mm, giving installers a band that fully covers standard panel edges with enough width to allow clean trimming without exposing the core. The 3mm thickness noted in the description delivers a pronounced edge profile that seats well against the substrate during application, helping adhesives form an even bond. FLEX in the description points to a flexible PVC format, which wraps along panel edges more easily than rigid stock and supports smoother feeding through typical edgebanding equipment. The 300FT length detail provides a continuous run that fits production workflows where repeated stops to change rolls would slow output.
This product is identified as Rehau PVC edgebanding in the Edge Banding product class, which positions it for finishing exposed edges on casework, cabinets, and similar panel-based assemblies. The 15/16 inch width in the SAP description fits use on panels where full edge coverage and trim allowance are needed, such as cabinet sides, shelves, or doors built from sheet goods. With a 3mm thickness specified, the banding forms a substantial edge that visually frames the panel face, which is useful on components where the edge is in direct view. The FLEX descriptor signals that this PVC banding adapts to straight edges used in furniture and fixture runs, so the same product serves across multiple panel types in a shop workflow.
The SAP description links this edgebanding to the CP20625 reference, giving shops a repeatable design choice they can call out on drawings or cut lists when they want the same look across projects. The EMB LAC detail further identifies its finish style, which supports consistent selection whenever matching edges to specific surface treatments. Sizing at 15/16 inch by 3mm means once installers dial in machine settings for trimming and pressure on one job, those settings translate directly to other panels using this same banding. The 300FT length in the description also helps maintain uniform results, because long runs can be processed from a single roll without mid-job material changes that might alter appearance.
Rehau 301021-322 is a PVC edgebanding in the Edge Banding product class, so it is used to finish exposed panel edges on cabinets, furniture, and similar assemblies.
The SAP description lists the edgebanding as 15/16 inch by 3mm, providing full edge coverage with extra width for trimming and a 3mm thick profile at the panel edge.
The SAP description specifies FLEX, indicating a flexible PVC construction that follows panel edges during application, supporting smoother feeding and alignment on typical edgebanding equipment.
The CP20625 reference in the SAP description identifies a specific design variant of this Rehau PVC edgebanding, supporting consistent selection when a particular appearance is required.
The SAP description notes a 300FT length, providing 300 feet of PVC edgebanding for extended production runs or multiple smaller cabinet and fixture projects.
This Rehau PVC edgebanding is listed in the Miscellaneous|Edgebanding category at Wurth Baer Supply, placing it among specialized edge banding solutions for woodworking projects.
The SAP description for Rehau PVC edgebanding 301021-322 clearly spells out a 15/16 inch by 3mm FLEX band with CP20625 and EMB LAC identifiers in a 300FT length, so shops can specify it confidently wherever that size and finish are required. Wurth Baer Supply presents it in the Edge Banding product class, tying it directly to panel edge finishing work for cabinets, fixtures, and furniture components. For projects calling for a flexible PVC band in this dimension set with a defined design reference, this part number offers a repeatable choice to standardize across jobs.
Sold In: 1 Roll