Rehau PVC edgebanding 301021-324 is a flexible PVC edge banding that covers and protects raw panel edges, giving cabinetry and casework a finished look and consistent edge profile on production jobs and smaller runs.
The 15/16 inch width provides coverage for standard 3/4 inch panels with overhang for flush trimming, helping installers dial in tight reveals and reduce visible substrate after trimming and sanding operations.
The 3mm thickness gives a substantial edge profile, supporting routed corners and reducing the risk of thin edges telegraphing substrate imperfections on doors, drawer fronts, and cabinet sides.
The CP40357 embossed lacquer surface creates a textured, coated finish on the PVC, which supports an edge appearance that coordinates with embossed or structured surfaces and holds up through normal handling during fabrication and installation.
The 300ft length supports longer production runs, reducing changeovers during banding operations and supporting continuous feeding on edgebanders or bench setups.
The 15/16 inch by 3mm dimension on this Rehau PVC edgebanding gives installers extra width to trim back, which is useful when aligning to slightly out-of-square panels or when sanding through minor glue squeeze-out along the edge.
The 3mm thickness builds a defined edge that supports straight trimming passes, giving operators a clear reference for flush-trim bits or edge trimmers and helping maintain uniform reveals across multiple cabinet parts.
The embossed lacquer surface identified as CP40357 offers a finished coating on the PVC, so the edge arrives with its final texture and color treatment, simplifying workflows that rely on pre-finished banding rather than post-finishing edges.
This Rehau PVC edgebanding, with a 15/16 inch width, is suited to edging 3/4 inch sheet goods in cabinet shops and millwork operations, where a small overhang is preferred for trimming doors, drawer fronts, and case parts.
The 3mm thickness supports applications that call for a more substantial edge, such as exposed cabinet ends, tall pantry doors, or shelving, where a thicker band can visually match heavier design lines and withstand normal shop handling.
The CP40357 embossed lacquer finish on the PVC face is designed for projects using matching or coordinating embossed surfaces, aligning edge texture with panel faces in commercial, institutional, or residential cabinetry programs.
The 300ft roll length fits well into standard edgebander setups or bench-top banding processes, letting shops run sequences of parts like cabinet runs, banks of drawers, or repeated shelving without frequent roll changes.
Because this product is classified as edge banding within edgebanding categories, it fits naturally into workflows that rely on pre-matched rolls assigned by part number to specific laminate or surface programs.
The 15/16 inch width gives consistent trimming allowance on 3/4 inch material, so once tools are dialed in, operators can repeat the same flush-trim setup across multiple jobs, reducing rework from exposed core or uneven overhang.
The 3mm thickness helps maintain a crisp edge line during routing or scraping because there is more PVC material above the substrate, which supports smoother transitions between face and edge on completed cabinet components.
The flexible PVC construction works with typical straight cabinet edges, promoting even bonding pressure across the length of doors and panels during banding operations and supporting long-term edge alignment.
The CP40357 embossed lacquer surface offers a ready-to-use finish on the edgeband, streamlining projects organized around pre-finished components and helping maintain consistent surface appearance from part to part.
The 300ft roll length supports batching similar parts together on the bander, which helps maintain color and texture continuity on large runs tied to the same Rehau, Inc. manufacturer part number 301021-324.
Rehau PVC edgebanding 301021-324 is 15/16 inch wide and 3mm thick, giving coverage and trimming allowance on standard 3/4 inch panels in cabinet and casework applications.
The 3mm thickness provides a heavier edge profile, supporting routing, light radiusing, and crisper transitions between panel face and edge on doors, drawer fronts, and exposed cabinet ends.
The CP40357 embossed lacquer surface gives the PVC edgebanding a textured, coated finish, supporting visual alignment with embossed or structured panel surfaces in coordinated cabinet programs.
Rehau PVC edgebanding 301021-324 is supplied in a 300ft length, supporting longer production runs and reducing roll change interruptions in cabinet shop workflows.
This product is PVC edge banding from Rehau, Inc., providing a flexible plastic edge solution suitable for cabinetry and similar panel-based construction.
The 15/16 inch width leaves a slight overhang on 3/4 inch material, allowing installers to flush-trim the edge for clean, consistent reveals on cabinet components.
Rehau PVC edgebanding 301021-324 pairs a 15/16 inch by 3mm size with a CP40357 embossed lacquer finish and a 300ft roll length, giving cabinet shops a defined, textured edge solution matched to 3/4 inch panel work.
This flexible PVC edge banding supports consistent trimming allowance, a substantial 3mm profile, and coordinated embossed appearance, making it a practical choice for doors, drawer fronts, and case parts using Rehau edge programs.
Sold In: 1 Roll