Rehau PVC edgebanding 301021-331 is a PVC edge banding solution that covers raw panel edges so cabinets and casework present a finished, uniform edge. The 15/16 inch width stated in the description gives coverage beyond most 3/4 inch panels, which helps hide minor alignment variation along cabinet runs. The 3mm thickness described in the product data creates a substantial edge that stands up to everyday contact on doors, drawer fronts, and work surfaces. The FLEX wording in the description indicates a flexible construction that follows cabinet contours more easily, which helps during installs on longer runs and gentle curves. The 300FT length noted in the description supplies a continuous roll for multiple components, which reduces waste from short offcuts on repetitive jobs. The Rehau, Inc. brand information identifies this banding as part of an established edge banding line commonly used in professional woodworking.
The 15/16 inch width called out in the SAP description gives installers room for slight overhang on standard panels, which supports clean trimming passes with edgebanders or hand trimmers. The 3mm thickness described for this Rehau PVC edgebanding provides a generous edge mass, which allows consistent trimming without chatter and supports a smooth profile after final passes. The flexible FLEX notation in the description means the banding conforms well as it is pressed onto the edge, which helps maintain pressure along the glue line during application. The 300FT roll length specified in the product data reduces mid-job roll changes on production edgebanders, which helps keep feed rates steady and parts flowing consistently through the line.
This Rehau, Inc. PVC edge banding identified as 301021-331 and classified as Edge Banding is suited to projects that need finished edges on sheet goods such as cabinets and other wood-based assemblies. The 15/16 inch width from the product description makes it well-matched to edging standard panel thicknesses commonly used in cabinetry, because the extra width allows for precise trimming back to the face. The 3mm thickness specified in the SAP description gives doors, drawer fronts, and exposed panel edges a more substantial feel, which is helpful on pieces that see repeated handling in kitchens, offices, and shops. The FLEX description indicates a formable construction that tracks panel edges smoothly, which is useful when running continuous banding along tall cabinet sides or wide tops where consistent contact is important. The 300FT roll length noted in the product data supports batch production, allowing shops to run many similar parts with the same banding specification on a single setup.
The combination of 15/16 inch width and 3mm thickness in the SAP description defines a repeatable edge geometry, which helps shops standardize cutter settings and trimming passes across multiple cabinet programs. Using a 3mm PVC edge as specified provides enough material for a light profiling pass after trimming, which improves edge feel on frequently used fronts without cutting into the substrate. The FLEX wording in the description means the banding adapts well as pressure rollers or handheld tools move along the edge, which supports even bonding along the length of the workpiece. With a 300FT length stated for the roll, installers and production teams can maintain the same Rehau PVC edgebanding specification from part to part, which simplifies material planning and reduces changeovers between different bands during a run.
Rehau PVC edgebanding 301021-331 uses a 15/16 inch width, giving slight overhang on typical panels so trimming tools can cut back to a clean, flush edge.
The 3mm thickness in the SAP description creates a substantial edge that supports smooth trimming and light profiling, giving doors and panels a solid-feeling perimeter.
The FLEX wording in the product data indicates a flexible PVC construction that conforms to panel edges, helping maintain contact and even glue lines during application.
The 300FT length specified for this Rehau PVC edgebanding supports longer production runs, reducing roll changes and helping keep cabinet parts moving efficiently.
This Edge Banding from Rehau, Inc., with its defined 15/16 inch by 3mm format, gives shops a consistent spec for repeatable trimming setups across multiple cabinet jobs.
Manufacturer part number 301021-331 uniquely identifies this 15/16 inch x 3mm FLEX PVC edge banding, helping buyers match this exact Rehau product in ongoing projects.
This Rehau PVC edgebanding 301021-331 combines a 15/16 inch width, 3mm thickness, FLEX construction, and 300FT length as stated in the description, giving shops a defined spec for finishing panel edges. Using this Edge Banding configuration lets installers and production teams run consistent setups on cabinets and similar projects where a substantial, trimmed edge is important. For woodworking jobs that call for a PVC edge solution from Rehau, this identified part number aligns with typical cabinet and casework dimensions.
Sold In: 1 Roll