Rehau PVC edgebanding 301021-335 is a PVC edge banding strip designed to finish exposed panel edges on woodworking projects. The 15/16 inch width covers typical board thickness with overhang for trimming, so installers can flush cut and achieve a straight finished edge. The 3mm thickness provides a substantial edge profile, supporting a solid feel along cabinet or furniture edges. The FLEX designation identifies a flexible PVC construction, which follows gentle curves and panel tolerances while staying tight to the substrate. The CP40826 EMB LAC description specifies an embossed lacquer surface, giving the banding a textured, lacquered finish that aligns visually with matching surfaces. Supplied in a 300ft length, the product supports longer runs of production work without frequent changeovers, which helps maintain consistency across multiple panels in a job.
This Rehau, Inc. PVC edge banding uses a 15/16 inch width to cover standard board edges with trimming allowance, simplifying setup on edgebanders or manual trimmers. The 3mm gauge fits projects built around thicker edge programs, so components can line up visually with other 3mm-banded parts. The FLEX PVC construction works with typical edge-banding equipment designed for PVC edges, supporting smooth feeding along the line. The CP40826 EMB LAC embossed lacquer face presents a consistent finished surface from panel to panel, which helps maintain visual continuity without additional edge finishing steps. With 300ft on a single roll, installers can complete longer runs or multiple units under one part number 301021-335, streamlining material handling during production.
As an edge banding product in the Edgebanding category, this Rehau PVC strip is intended for finishing exposed board edges on cabinets, furniture, or other panel-based constructions. The 15/16 inch width covers the face and a margin beyond the substrate, so trimming tools can cut back to a clean line without risking chip-out at the board edge. With its 3mm thickness, the banding suits designs that call for a more substantial edge, supporting consistent reveals when matched with other 3mm PVC edges in the same project. The flexible PVC noted in the SAP description allows the banding to follow standard panel geometry, providing a tight edge around typical straight runs and mild transitions. The CP40826 EMB LAC embossed lacquer finish helps the edge visually coordinate with surfaces using the same CP40826 design language.
The manufacturer part number 301021-335 gives shops a specific identifier for this combination of width, thickness, FLEX PVC, and CP40826 EMB LAC finish, which supports consistent reordering for repeat projects. Being categorized as Edge Banding under Miscellaneous|Edgebanding clarifies its role as the edge treatment component in a larger panel system, so material lists can separate core panels from finishing edges. The embossed lacquer surface described as EMB LAC provides a textured, lacquer-style appearance that masks minor handling marks better than a flat surface during normal shop workflow. The 300ft length supports dialing in machine settings once and then running a series of parts, which reduces interruptions that could introduce visual variation between cabinets or casework units.
This Rehau PVC edgebanding has a 15/16 inch width and a 3mm thickness, so it covers standard panel edges with trimming allowance and delivers a substantial 3mm edge profile.
The FLEX designation identifies flexible PVC construction, which allows the strip to track along typical panel edges and gentle curves while maintaining a tight, uniform edge line.
The Rehau edge banding roll for part 301021-335 is 300ft long, supporting longer production runs or multiple units under a single setup on the edgebander.
CP40826 EMB LAC describes an embossed lacquer finish, giving the PVC edge a textured, lacquered appearance that coordinates with matching CP40826 surface designs.
The 3mm thickness builds a pronounced edge, so cabinets or furniture using this banding present a heavier edge detail consistent with 3mm-based design programs.
PVC edgebanding 301021-335 is manufactured by Rehau, Inc., and is presented by Wurth Baer Supply in the Edgebanding product class.
Rehau PVC edgebanding 301021-335 combines 15/16 inch width, 3mm thickness, FLEX PVC, and a CP40826 EMB LAC embossed lacquer finish to deliver a defined 3mm edge profile. The 300ft roll length supports shop runs where multiple panels or full cabinet jobs share one consistent edge detail. With its specific manufacturer part number and clear dimensional description, this edge banding slots cleanly into material lists for projects built around 3mm PVC edges. Select this Rehau PVC edge banding when a flexible 15/16 x 3mm CP40826 embossed lacquer edge is required for panel-based construction.
Sold In: 1 Roll