Rehau PVC edgebanding 301021-336 is PVC edge banding that finishes exposed panel edges so cabinet and furniture parts present a uniform, protected edge in use. The Rehau, Inc. brand designation ties this roll into a recognized PVC edgebanding line, which helps shops keep projects consistent when repeating jobs. The 301021-336 manufacturer part number gives installers a precise identifier, so reorders match color and texture across runs.
The SAP description "15/16X3MM FLEX CP20746 EMB LAC 300FT" defines what this strip does on the workpiece. The 15/16 inch width covers standard panel thicknesses with some tolerance, helping hide slight saw variation along the edge. The 3mm thickness builds a substantial edge profile, giving corners a more robust feel when parts are handled.
The term FLEX in the description indicates a flexible PVC formulation, which helps the banding follow modest curves or panel imperfections during application. The CP20746 EMB LAC notation identifies a specific embossed lacquered surface, tying visual appearance and texture to a repeatable code for shop standards.
The 15/16X3MM dimensions in the SAP description guide how this PVC edgebanding feeds through edgebanders and trimmers. At 15/16 inch wide, the banding overhangs common substrate thicknesses, giving enough material for top and bottom trimming passes to leave a crisp, flush edge. The 3mm thickness works with settings aimed at thicker edge profiles, supporting solid-feeling door and panel edges once applied.
The 300FT notation defines the roll length, which matters when planning setup time on production edgebanders. A longer roll supports extended runs on the same setup, helping maintain consistent feed parameters over a larger batch of cabinet parts.
This Rehau PVC edgebanding sits in the Miscellaneous|Edgebanding category and the Edge Banding product class, placing it squarely in typical cabinet and furniture edge finishing work. The 15/16 inch width lets installers run it on standard case sides, shelves, and door fronts where the banding must fully cover the core and slightly overlap both faces. That overlap supports clean trimming, leaving a defined edge along melamine, laminate, or similar panel materials.
The 3mm thickness suits situations where a more substantial edge profile is preferred over thin tape, such as cabinet doors, drawer fronts, and high-contact verticals. In these locations, the extra material at the edge presents a more pronounced profile that feels substantial when opened or closed. The FLEX designation helps the strip settle onto edges without fighting minor curvature, aiding consistent glue-line contact during application on shop edgebanders.
The CP20746 EMB LAC code ties the color, embossing, and lacquered appearance to a specific reference. In practice, this lets a shop specify the same PVC edgebanding across multiple jobs so replacement doors or new cabinet runs match earlier work visually. The manufacturer part number 301021-336 backs that up as the precise identifier, reducing mixups between similar colors or textures on the shelf.
The 15/16X3MM FLEX CP20746 EMB LAC 300FT specification shapes how this edgebanding behaves on equipment and finished parts. The 15/16 inch width gives edgebander operators predictable overhang above and below common panel sizes, which simplifies trimming knife and flush rout settings. Reliable overhang reduces chances of exposed core after trimming, supporting a clean finished edge across full cabinet runs.
The 3mm thickness interacts with machine pressure and trimming settings to deliver a heavier edge that still processes well on equipment set up for thick PVC banding. This consistent thickness helps maintain uniform radius or flush profiles when the same tools run many parts in succession. The FLEX characteristic works with feed rollers and pressure zones, encouraging the banding to seat evenly along edges, which supports uniform adhesion lines.
The 300FT roll length plays directly into production flow. With that length on a single roll, shops can run longer sequences of doors, drawer fronts, or carcass parts without pausing to change material, keeping feed, heat, and pressure parameters stable for more pieces. That continuity helps reduce small variations in edge appearance that can come from mid-run changes.
Rehau PVC edgebanding 301021-336 at 15/16X3MM gives overhang on typical panel thicknesses, allowing trimming to a flush, substantial edge on cabinet sides, doors, and shelves.
Rehau PVC edgebanding 301021-336 with FLEX is formulated to be flexible, so it conforms to slight curves and edge variations, supporting even contact along the glue line during application.
Rehau PVC edgebanding 301021-336 with CP20746 EMB LAC denotes a specific embossed lacquered surface, so color, texture, and sheen can be repeated using the same coded product.
Rehau PVC edgebanding 301021-336 in a 300FT roll supports longer production runs on one setup, helping maintain consistent machine adjustments across many parts.
Rehau PVC edgebanding 301021-336 at 3mm builds a thicker edge profile, giving doors and panels a more substantial feel at their touch points.
Rehau PVC edgebanding 301021-336 uses the manufacturer part number as a precise reference, helping match the same PVC edgebanding on repeat or expansion projects.
Rehau PVC edgebanding 301021-336 pairs a 15/16X3MM format with a FLEX PVC construction and a defined CP20746 EMB LAC surface, giving shops a repeatable spec for edge finishing. The 300FT roll length supports extended runs under stable machine settings. When a project calls for PVC edge banding within these dimensions and appearance parameters, this Rehau, Inc. product from Wurth Baer Supply provides a clearly identified option that aligns panel size, edge profile, and visual code on cabinet and furniture work.
Sold In: 1 Roll