Rehau PVC edgebanding 301021-337 is a PVC edge banding from Rehau, Inc. that finishes exposed panel edges on woodworking and cabinet projects, creating a defined boundary between panel faces and edges for a consistent, professional appearance across parts. The 15/16 inch width gives coverage over standard panel thickness with a bit of margin, which helps hide small alignment variations along a run. The 3mm thickness provides a substantial edge profile that can be machined and trimmed while maintaining a solid visual line. The flex construction described in the SAP text supports working the edging around typical straight cabinet and casework edges, so installers can process parts in a steady workflow. With a 300 foot length, the roll supports longer production runs or multiple jobs without frequent changeover.
The 15/16 inch by 3mm format in the SAP description defines how this Rehau PVC edgebanding fits common panel builds, giving enough height for trimming machines or hand tools to cut a clean line along the edge. The flex term in the description indicates the banding is supplied in a coiled form suited to edge banding workflows, which supports feeding through typical edging equipment or manual application setups. The 300 foot length provides extended continuous material, so operators can run longer cabinet sides or grouped components without frequent roll changes that interrupt setup and alignment. Using a single material designation, 301021-337, across those parts helps keep edge appearance consistent from piece to piece.
This Rehau PVC edgebanding, listed as edge banding in the product class, fits into woodworking and cabinet workflows that call for covering raw panel edges with a uniform PVC strip. The 15/16 inch width aligns with typical panel thicknesses used in casework and cabinetry, giving installers a workable amount of overhang for trimming flush without exposing the core. Because the SAP description specifies a 3mm thickness, the banding builds a strong visual edge that can align with contemporary cabinet designs using thicker edgeband profiles. The Rehau, Inc. branding connects this material with a recognized edgebanding line, which helps shops standardize on a specific look over multiple projects when the same code 301021-337 is used.
The precise 15/16 inch by 3mm sizing allows equipment settings or hand-trimming routines to be dialed in once and reused on runs that specify Rehau PVC edgebanding 301021-337, reducing adjustment time between parts that share this edge treatment. The flex roll format described in the SAP text (with a 300 foot length) supports continuous feeding through an edge bander or manual workflow, which helps maintain consistent pressure, heat, or bonding processes along the full length of panels. The specific CP60447 EMB LAC designation in the SAP description identifies a defined surface and appearance family within Rehau offerings, so when the same code is used again, installers can expect the edge look to align with previous runs. By anchoring work orders and setup notes to the manufacturer part number 301021-337, shops can track which edge banding was used on a job and repeat the same configuration on future orders.
Rehau PVC edgebanding 301021-337 is identified in the SAP description as 15/16 inch wide by 3mm thick, giving sizing suited to covering panel edges with trim allowance.
The 3mm thickness creates a substantial edge profile, supporting a defined transition between panel surface and edge that holds its visual line through trimming.
The 300 foot length listed in the SAP description supports longer runs or multiple cabinets from one roll, reducing changeovers during edging operations.
This product is described as Rehau PVC edgebanding, so it uses PVC edge banding material suited to covering exposed panel edges.
The 15/16 inch width provides coverage over the panel edge with a margin, allowing trimming operations to cut back to a clean, flush edge line.
The CP60447 EMB LAC text in the SAP description identifies a specific Rehau finish and appearance family, supporting consistent edge look when that code is specified.
Choosing Rehau PVC edgebanding 301021-337 gives shops a defined 15/16 inch by 3mm PVC edge banding from Rehau, Inc. that fits standard cabinet and panel work. The 300 foot flex roll described in the SAP text supports continuous edging runs, while the CP60447 EMB LAC designation and manufacturer part number 301021-337 let teams call out the same edging across drawings and orders for repeatable appearance from job to job.
Sold In: 1 Roll