Rehau PVC edgebanding 301021-338 15/16 in x 3mm

Rehau PVC Edgebanding 301021-338 For Clean Edges

Rehau PVC edgebanding 301021-338 is a PVC edge banding product from Rehau, Inc. that covers and finishes raw panel edges, so cabinet and furniture projects present a clean, unified edge instead of exposed substrate. The 15/16 inch width stated in the description gives coverage over typical 3/4 inch panels with room for trimming, which supports a precise flush finish during machining. The 3mm thickness described in the SAP text provides a substantial edge profile that can be shaped and trimmed, which supports consistent results on straight runs and gentle contours. The flex description signals that this edgebanding is formed to bend, so it can follow modest curves and still sit tight to the core. The CP60520 EMB LAC reference in the description identifies a specific emboss and lacquer combination, so color and surface appearance can be matched to corresponding components identified under the same code.

Key Rehau Edgeband Details For Project Planning

• The 15/16 inch width noted in the description covers common 3/4 inch panels with overhang, which allows trimming flush after bonding for a tight, professional edge line.
• The 3mm thickness described in the SAP text creates a robust edge profile, which supports shaping and light profiling passes without cutting through to the core material.
• The flex wording in the description indicates a formable PVC construction, which lets the edgebanding follow slight curves and inside or outside corners while maintaining face contact.
• The CP60520 code tied to this edgebanding identifies a particular design series, which helps align this tape visually with other components referencing the same CP60520 designation.
• The EMB LAC reference in the description points to an embossed and lacquered surface, which provides a defined texture and finished appearance along the cabinet or furniture edge.
• The 300FT length specified in the SAP description offers a continuous run, which supports longer cabinet lines or multiple smaller jobs from one coil with fewer changeovers.

Edgebanding Dimensions And Details For Installation

The 15/16 inch width stated for Rehau PVC edgebanding 301021-338 gives extra coverage beyond standard 3/4 inch panels, so the tape can be centered, bonded, and trimmed back without exposing the core. The 3mm thickness in the SAP description establishes the amount of material available for flush trimming, which supports clean edges when using common edgebanding trimmers. The flex note in the product description indicates that this PVC material is designed to bend, so it can be worked around gentle radii and returns while staying in contact with the substrate. The 300FT length described supports extended runs, so longer pieces of casework can be processed from a single coil for consistent color and texture along the entire edge sequence.

Using Rehau PVC Edgebanding 301021-338 In The Shop

Where This Rehau PVC Edgeband Fits Best

The product name Rehau PVC edgebanding, 301021-338, identifies this item as PVC edge banding from Rehau, Inc., so it aligns well with cabinet and furniture projects that specify Rehau edge treatments. The 15/16 inch by 3mm dimension in the SAP description makes this edgeband suited to work on panels built from typical sheet goods where the core thickness is near 3/4 inch, because the extra width and thickness give room for trimming and light profiling. The CP60520 identification in the SAP text connects this tape to a particular design reference, so projects already using surfaces tied to CP60520 can extend that look across exposed edges. The EMB LAC wording in the description indicates an embossed and lacquered surface, which supports visually consistent edges where a textured, finished face is part of the design intent. The 300FT length noted in the description lends itself to production or multi-cabinet runs, because a single coil can serve several case pieces that share the same Rehau specification.

Details That Support Repeatable Edge Results

The 3mm thickness specified for Rehau PVC edgebanding 301021-338 provides a stable band of material, which helps trimming tools register consistently and produce a straight, uninterrupted edge. The 15/16 inch width described allows installers to position the tape with modest overhang on both faces, which supports accurate flush trimming without risking short coverage at any point along the run. The flex descriptor tied to this product indicates that the PVC formulation is designed to conform, so it can adapt to modest curves and panel irregularities while maintaining a continuous bond line. The EMB LAC reference in the description signals an embossed and lacquered finish, which helps conceal minor tool marks from trimming along the edge because the texture and sheen diffuse small irregularities. The CP60520 code in the SAP text provides a precise design identifier, which can be matched to drawings or materials lists that specify the same code, supporting repeatable selection when reordering for later phases or repair work.

Common Questions About Rehau PVC Edgebanding 301021-338

Select Rehau PVC Edgebanding 301021-338 For Matched Edges

Rehau PVC edgebanding 301021-338 combines a 15/16 inch width, 3mm thickness, and flex PVC construction, so panel edges can be finished with trim-ready overhang and formable material. The CP60520 and EMB LAC identifiers tie this coil to a specific embossed, lacquered design, so edges stay visually aligned with matching Rehau components across cabinets, furniture, or casework. For projects calling out this Rehau part number, sourcing it from Wurth Baer Supply supports consistent appearance and dimension every time this edgebanding is applied.